What about the Red Flag Linux system?

For the installation of Red Flag Linux How to configure the network card and time, as well as customizing the desktop and other basic configuration of this experience. For newly installed systems, the network parameters and time zones should be configured first.

1, Software installation package Type

Install the Linux system installation package type, with three typical configurations by default (full installation is recommended for beginners)

2, configure a good red Flag Linux partition, after network configuration (if not configured can be installed after the configuration will continue)

3, after performing the next step, enter the operating system format file system. Load CD file install system procedure

4, the installation process needs to wait about more than 10 minutes

　　#FormatImgID_5 #

　　Landing type selection

1, after installation, color depth and resolution according to the actual display support parameter selection, Landing interface type selection (server recommended text landing ) Learn to use the recommended selection of graphics landing method

2, so far even if the configuration is over, after the installation is complete, restart the operating system.

3, loading the operating system driver, zoning information, Restart the operating system, the first boot into the installation of graphics and system software

4, red Flag Linux boot interface. Note that the start of the time, found that there are abnormal startup services, such as the network card to start this is generally a problem with the configuration of networking parameters (such as IP conflict or NIC does not start activation)

　　Configuration after the first startup

1, for the first boot, if the selection is a graphical interface to start. The landing window interface as shown below, similar to the Windows Landing window ( if it is a text command line, you can start by inputting starting XFS ), the default is the Chinese language landing

2, the first landing needs to load hardware drivers and peripherals, etc., we do not have to worry about Linux system for the underlying driver support is very good.

3, CD-ROM automatic playback, landing into the operating system will automatically open the contents of the CD, you can cancel the load of the CD-ROM to compete against the operation

4, time zone guidance, for Linux systems, many process services need to rely on time (if the time does not affect the process or program operation and startup) so it is very important to check the time accurately first.

5, Graphics Interface configuration network card parameters, for the Red Flag Linux network adapter configuration, and XP configuration similar to find the "Network Neighborhood" right key properties can be opened, network configuration, click "Modify Parameters"

6, other PostScript, for Red Flag Linux, has been as far as possible to emulate the use of Windows habits. Including my document icon, My Computer, the Start menu, Control Panel and so on will enable beginners to get the fastest Linux