What if the 192.168.1.1 router doesn't get in?

We sometimes find that the computer router can not log in, the input router's address 192.168.1.1 can not be accessed, but there is a domain name resolution error (Error code: 105) What should we do at this time? Small series according to their own experience to say the router can not login processing methods, I hope to help you! This map is from the network image processing, the copyright belongs to the original author all!

Method/Step

Small series once touched the address bar to enter the router address, unable to log on to the situation of the router! When this problem occurs, let small series toss a long time, find a lot of methods, finally successfully landed the router. Today's small make up their experience to sum up, hoping to help the emergence of similar problems friends!

We first check if you entered the router landing address error, because some routers are 192.168.1.1 for landing, and some routers may be other landing addresses such as 192.168.0.1, so how do we look at the router's Landing address? We can find your router's Landing address and login ID and password on the back of the router. The following small series assumes that your router's address is 192.168.1.1 to explain, if your router is not this login address, you can replace the address of this article with your router default address to operate!

If you confirm that the router address you entered in your browser is correct, you cannot log in. Please confirm that the router's connection is correct, and the router and computer are connected correctly! The router's WAN port should link with the broadband cat, LAN port and computer network card to connect!

If you are sure that the router connection is not a problem, we can now restore the router's factory settings! After the router has a reset reset key, we hold down this key do not put 10 seconds or so, and so on the router lights after all! Of course, different router recovery times may be different, You can see the instruction manual of your router specifically. So we restored the default settings to the router!

Now you enter your router address in the browser 192.168.1.1 "assume this", see if you can go into the router, if you can not login to the router, we could detect whether the router has been connected to the signal, we in the Start menu in the Search box to enter the command cmd, and then open the Command Prompt window! Then the command Prompt window to enter ping 192.168.1.1 and then return to see the message!

If the display router connection is normal, but we still can't wait for the router through the browser, we can try to change the IP address of the local connection, let the IP address to obtain automatically! Because the small knitting computer is the WIN7 system, we open the local connection and then view the properties! Change both IP and DNS to automatic access!

Now if you still can't log in the router, really small make up also don't know what to do! Then we try to change the browser, small series has personally encountered such a problem, small make up a browser, and then enter the address of the router finally successfully login! Let small weave toss for a long time, finally discovered is the browser problem, Of course, this problem cannot be taken into account!