What if the computer doesn't read and move the hard drive?

What if the computer doesn't read and move the hard drive?

Computer does not read mobile hard disk solution one:

1, if it is a mobile hard drive USB interface line has two interfaces can be two interface plug into the USB interface, can provide external power to the USB hard disk, the use of external power supply.

2, check the data line is normal, replace the data line test. Poor data lines may have problems with poor contact or large power loss.

Some mp3mp4, the mobile phone's data line looks like the mobile hard disk data line, but the fact that the mobile hard disk data line requirements are higher, the need for the power loss is small, so many mp3mp4, mobile phone data line can not guarantee the normal power supply of mobile hard disk.

3, multiple computer use test. If there is no problem on the other computer, the data cable is no problem, then it may be the problem of your own computer. Computer USB interface damage or system USB conflict, there will be such problems, you can understand the computer master to help solve.

4, File system test recovery. Assembled mobile hard disk can be removed from the hard drive mounted to their own computer, if the discovery disk can be read out, you can use the File System test recovery program to carry out a test and recovery, restore completed without bad way, and then put back to the hard disk box. If still can't read out, is the problem of hard disk box. Of course, if it is the original mobile hard drive, directly to find sold to your products business bar, are after-sales service. At this point show the superiority of the brand product after-sales service.

Computer does not read mobile hard disk solution two:

First, the system-driven reasons

1, USB is not recognized by the computer, boot press F8 into the safe mode after the exit, select the restart or shutdown in the boot, you can enter the normal mode.

2, if the failure is still, using system disk repair, open a command prompt input Sfc/scannow return (SFC and/between a space), insert the original system disk repair system, the system will be automatically compared to repair.

3, if the failure is still, set the optical drive in the BIOS for the first boot device Insert system installation disk press R to select "Repair Installation" can be.

Second, set the CMOS parameters

1, the system can not detect the situation of USB hard disk, this is mainly because the motherboard default CMOS port is turned off, if it is not set to open, then Windows naturally cannot detect the mobile hard drive.

Third, USB extension cord failure

The USB interface type mismatch causes the removable hard disk to be unusable. Because a high-speed mobile device is plugged into a low-speed hub, the device may not be installed properly, as long as the connection line is replaced with a USB 2.0 standard to resolve the failure.

Attention matters

After you install the driver, you can view the removable hard drive from Device Manager, but there is no corresponding letter identifier in the resource manager, which is the result of improper system setup.