What if the computer mouse can't move?

One, the mouse itself failed

This fault is very good detection, if it is the mouse itself fault, you just need to connect your mouse to another computer, and then if the mouse is still unable to move, it is a mouse malfunction, the mouse is normal, the elimination of the mouse fault.

Second, the mouse is normal, the mouse driver is not installed or installation is not completed

Check your computer to see if your mouse driver is installed by testing the mouse before it is OK. By driving life to fix whether you have an exception to the drive. Then test to see if the mouse is back to normal.

Third, the drive is also normal, the system fails.

If the verification driver discovery is also normal, then it may be the system itself fault. You can click "Start-Run", enter "CMD" on the Run input box, press ENTER to use this command, then enter the "Sfc/scannow" command on the Open Command Prompt window, then fix the system on the Insert system disk, and then the fault will be resolved after the repair is completed.

If the repair system does not work recommend you or reload the system, so if the system failure caused the mouse can not move, then you reload the system after the mouse can return to normal.

Four, the last to say that sometimes is the mouse into the computer's USB interface caused by poor mouse can not move the phenomenon, but also users ignore this reason caused by the mouse after the replacement mouse is still unable to move. Then the final is to verify the mouse USB interface and line whether there is wear and tear, excluding the socket caused by the mouse can not move the reason.

Small series recommended: computer boot mouse can not move