What if the display temperature is too high?

In addition to the CPU, the highest calorific value of the computer is the monitor. All computer components, if the temperature in use is too high, will shorten the service life, the monitor is no exception.

Most display shell is surrounded by a thermal hole, and some special displays, such as: Philips 107D4 only the upper and lower sides of the heat dissipation hole, the left and right sides are sealed tightly, so that the gas is not smooth, the air does not flow, fever is larger! After some exploration, there are two ways to improve the effectiveness of heat dissipation:

1, like other monitors in its shell on both sides of the increase in cooling holes, this method for the temperature is not too high and good air circulation room is enough. Operation is also extremely simple: remove the shell with a soldering iron in its left and right side of the hole can be (can be a sharp knife trimming edge, such as a better drill).

2. For a monitor such as a small weave that is used in a hot and stuffy room, the former method is less effective. So the small series uses a more active heat dissipation method: Add fan!

The specific operation methods are as follows: Go to the computer city to buy a computer chassis fan, in the shell to choose the hottest CRT tube seat of the appropriate position, left, right, rear can be, if you want to dazzle your DIY skills, put on top more cattle! Just pay attention to the hot air is upward, the fan must be reversed (suction type). Then use the iron to iron out the corresponding size with the purchase of the square hole (preferably pencil line), and then the fan Four corners of the installation hole position of the corresponding four holes, with bolts to fix the fan. It is recommended to add damping pad between the fan and the housing (just look for some elastic rubber.) Finally, the fan power cable will be extended in accordance with the need to plug the power supply to the chassis power output head that is accomplished!

　When we use the computer in the summer, we should pay attention to the following things:

1, the display around should retain a certain space, in order to facilitate heat dissipation.

2, the top of the monitor do not pile up books and other items to facilitate the heat from the top scattered.

3, especially in the temperature above 35 degrees, we use the computer, it is best not to work long hours.

Everyone in the maintenance of the computer, do not ignore the maintenance of the monitor, pay attention to its cooling problem, to prevent its overheating and damage, in this heat, the display can be safely spent.