What if the printer doesn't print clearly?

The first type of problem is that ink is weak, and this situation occurs in two cases, one is a single ink printer, and the other is a dual-cartridge printer. The most fundamental way to solve this problem is to add ink, the ink cartridge will be taken off the tip of the bottle with a sharp mouth into the printer cartridge ink plus ink. Check the print quality again.

If it is a single cartridge must be ink-adding operation, but the dual cartridge in your temporary without ink situation can be emergency operation to improve print quality. First to enter the printer settings, click on the desktop status bar of the printer icon, this is a printer to print the Document Action box, point open File Selection properties. Is the printer management interface. Then the printer management is worth it here.

If there is no ink in an ink cartridge, you can print it by specifying another cartridge (of course, if the color cartridge is not ink then you can only print black color but the quality is clear). Select a print cartridge in the cartridge selection.

If not ink cartridges, such as the ink is just added to the printing is not clear, this time you can remove the cartridge, reload up. (Sometimes ink cartridge contact is not good) although very simple operation but sometimes it may be very practical.

When the printer cartridge is installed, remember to carefully rub the side of the ink clean (do not wipe the ink contact head, is the side of the ink) so as to prevent ink in the printer pollution to the printing process. can also prevent the ink on the side of the sticky caused the nozzle plug.

If the printer appears to be out of print pattern, you need to calibrate the pattern. First into the printer management, in the maintenance of the selection of print head to it. Follow the pop-up prompts to load the paper and then make sure to print the head on it. If you have a bad effect, you can do it multiple times (try reinstalling the cartridge on top)

It is also one of the problems in printing that the printer is clogged during a long period of time using the nozzle. If the ink cartridge is sufficient, you can do a printer nozzle cleaning once. Method is also to enter the printer maintenance, in the selection of nozzle cleaning. No other manual operation is required, just wait for the printer to complete the operation automatically.

These are the daily maintenance methods of the printer and do not involve hardware maintenance. But as long as the good use of the custom printer is still not a problem. If the hardware is really damaged the best is to send repair, too much to do is useless.