What if the wireless card is turned on in Windows 8 and the wireless light is on but cannot find the wireless signal

Wireless Internet access requires three levels of Setup to open: physical switches, software switches and wireless services. The wireless LED will not light until the switch is turned on. Check to see if the wireless service is not turned on when the indicator light is on but still unable to search for the wireless network signal.

Operation Steps:

1, open the Service management interface.

Can be opened in three ways

(1) Right click on the desktop computer icon, select "Management", click "Services and Applications", click "Services";

(2) Press the Windows logo key at the same time (keyboard

Logo keys) and r key, open the Run interface, enter services, click OK, the following figure:

(3) At the same time, press CTRL, SHIFT and ESC three keys, open Task Manager, click the "Services" tab;

2. Locate the WLAN AutoConfig (WLANSVC) service, if it is manual or disabled, right-click the service to select Enable (the Task Manager service displays "start").

If you want this service to run automatically after startup, right-click the service Select "Properties", the Startup type is selected as "Automatic", then click "Apply", click "Enable", click "OK" button to close the Settings window. This restarts the computer so that the service can run automatically.

You can set the steps as shown in the following illustration:

WINDOWS8 Tutorial