What if the Windows8 wireless network is unstable? WIN8 Wireless network Problem Solving method

WINDOWS8 wireless network instability how to do

First step,

Set on the computer: first open the Device Manager, the wireless network card point right, and then select Properties, the computer's wireless network card display is "Broadcom 802.11n network adapter", into the property after a high-level, into a IBSS down after the model, and then choose 802.11ABGN Automatic; And then pull down there's a Xpress (TM) technology, select Enable, continue Drop-down, there is an incompatible 40MHz, select Disabled, Priority and VLAN, select Enable, minimum power consumption, selected disabled. WIN8 Solution for wireless network instability

Step Two,

Run on computer: Press win+x command Prompt (admin) to enter Netsh int tcp set heuristics disabled, carriage return, netsh int tcp set global autotuninglevel=disabled, carriage return, n etsh int TCP Set global rss=enabled, carriage return, netsh int tcp show global, carriage return.

WIN8 Solution for wireless network instability

Step Three,

Set on the router: Click on wireless Settings, channel to 11~ mode select 11g only. After the start of the DHCP server, address rental period to 2880. Look down to find the static address assignment to add a MAC address (this address is filled in, local address view in the details of the WiFi status, IP address filled IPv4 address).

After the above steps, WIN8 wireless network instability can be solved, the problem of friends may wish to try the above method.

What to do if the WIN8 network is limited

Usually WIN8 network is limited mainly because the computer does not get a valid IP address, resulting in a restricted prompt, and IP address is computer automatic acquisition, if the acquisition failed, you may set up IP.

method is to ensure that the network is not a problem, we can first try to give WIN8 computer set a fixed ip,win8 IP address method is very simple, you can refer to our today's article, click on the image below to enter.

Usually, if the network is OK, we can solve the problem by setting up Win8 IP.

What to do if you don't search for a wireless network

Pre-Win8 Chinese version of the system, wireless device driver normal, but not the search signal. Flight mode is confirmed to be off.

1. Open the Super button and select "Settings". You can move to the top right corner of the screen with the mouse to open the Super button, or by pressing the keyboard "Windows logo key" (keys on the keyboard) + "C" key to quickly open;

2. Click on "More Computer Settings" – "Wireless" menu;

3. Click on "Wireless Settings" under the small slider to open the wireless function;

4. After the setup is complete, a list of the networks can be found to search for wireless signals.

If the network list displays the following information, check to see if the Wireless Management Service (WLAN AutoConfig (WLANSVC) service) is started.

WLAN AutoConfig Service View method:

Right-click in the taskbar space to select Task Manager;

If shown as a brief information pattern as shown in the following figure, click "Detailed Information";

Click on the "Services" tab to find the Wlansvc (WLAN autoconfig) service to see if the "Status" column is displayed "running";

If shown as stopped, right-click the service to select Start.

This method can start the service, but if the service is disabled or started manually, the service will not start automatically after restarting the computer. If you need this service to start automatically, you can click on "Open service" into the service management interface, refer to the following Knowledge base modified to automatically start.