What if you can't get a WiFi wireless signal on the net?

[Ios/android device] can't connect the wireless signal to the net.

When using the wireless terminal of the IOS system to connect to the signal, if the signal connection is successful, the network can be used in the following ways to troubleshoot:

Confirm The IOS terminal is automatically acquiring IP addresses, DNS server addresses, and acquiring IP on the same network segment as the router.

The router's broadband connection status and firewall settings may cause LAN computers to be on the internet abnormally. Please log in to the router to confirm that the WAN Port is connected properly, and turn off the Internet control and other filtering functions.

Use a different wireless terminal to connect to the router to confirm that you can access the Internet properly. You can also use this wireless terminal to connect to other normal wireless network comparison tests.

[Windows 8] wireless signal is not connected to the Web

When you use a Windows 8 system computer to connect to a wireless network, if a wireless connection is successful, but you do not have access to the Internet, you can troubleshoot the following methods:

Verify that the computer wireless card is automatically obtained IP address, DNS server address, and access to the same network segment with the router IP.

Confirmation Method : computer desktop in the lower right corner click on the Network icon, click Open Network and Sharing Center , in the Network and Sharing Center dialog box in the upper left corner click Change Adapter Settings , find wireless connection , right click Wireless Connection , click status >> details . Confirm that the DHCP service is turned on, IPV4 address, default gateway, DNS server address have been acquired.

The router's broadband connection status and firewall settings may cause LAN computers to be on the internet abnormally. Please log in to the router to confirm that the WAN Port is connected properly, and turn off the Internet control and other filtering functions.

Use a different wireless terminal to connect to the router to confirm that you can access the Internet properly. You can also use this wireless terminal to connect to other normal wireless network comparison tests

[Windows XP] can't connect a wireless signal to the web.

Just look at the above method and then open the network connection a little different: method: The computer desktop to find a network of neighbors, right click and select Properties, find local connection, right click Select Status >> Details. Verify that the DHCP service is turned on, and that the IP address, default gateway, DNS server address have been acquired.