Method 1: automatic system repair
Right-click the USB flash drive, select a tool in the property, and then start to check for automatic repair and recovery to see if it can be repaired.
Method 2: Tool software method
We can use the Usboot tool to fix the USB flash drive with 0 bytes displayed on the USB flash drive, and forcibly format the USB flash drive in HDD mode after running. Click it to dial down and insert a USB flash drive. Although the USB flash drive is forcibly formatted in this step, some USB flash drives may still be 0 bytes and cannot be opened. Some USB flash drives can be formatted successfully using this method, but some cannot be repaired, in this case, we can try the third method.
Method 3: Mass production tools
Use the ChipGenius tool to detect the chip model as follows:
Device name: [I:] USB Mass Storage Device (Generic Flash Disk USB Device)
PNP device ID: VID = 058F PID = 6387
Device serial number: 22AF4564
Device version: 8.07
Device Type: standard USB-high-speed
Chip Manufacturer: Alcor (Anguo)
Chip model: AU6983
Product Manufacturer: Generic
Product Model: Flash Disk
If neither method nor method succeeds, you can only use the third method. Open the USB flash disk and check its chip model, then, find this type of production tool on Baidu (this tool does not need to be installed after download, and the tools to be installed must be fake) for mass production repair, generally, the problem that the USB flash drive is 0 bytes is fixed successfully.
Method 4: Use Windows's built-in partitioning tool Fdisk to recreate a partition table
① Insert the USB flash drive into the computer and start the computer. Right-click my computer and choose Manage. The Computer Management window is displayed.
② Click "Disk Management" under "storage" on the left of the window. Information about all storage devices in the current system is displayed. Among them, "disk 1 (removable)" is the U disk to be repaired.
③ The cursor points to "disk 1", right-click, select "New partition", and then select "FAT32" or "NTFS". The system prompts that the partition is successfully created.
④ Format the USB flash drive.
Method 4: "llftool"
Baidu searched for "llftool" to find and download the llftool and open the downloaded llftool. Note: After opening the software, you must select a USB flash drive and then click "next! As shown in the following figure:
Then select the "low-level formatting" option and click "format this hard disk". We actually choose a USB flash disk, so the format is a USB flash disk. As shown in the following figure:
Step 3:If you think "Step 1" and "Step 2" are very troublesome, you can directly perform the operations in step 3. We split the USB flash disk and view the model of the USB flash disk chip, then we can search for the production tool of this model on Baidu to solve the problem.