What to do when Tplink cat is set up and can't go online

Tplink The solution to the Internet after the setting of the light cat

Step one, connection method.

Routing a cat----a router WAN port; a router LAN port----a computer.

Step two, set the method

Before setting, disconnect this router WAN port network cable, and so on when the settings are plugged in.

1, set the router IP segment.

①, LAN port settings, in order to avoid conflicts (routing cat LAN Port ip:192.168.1.1), you can change the IP router to other IP segments. For example, change to: 192.168.2.1

At the restart router, the address of the router is: 192.168.2.1.

2. Set up the method of Internet router.

①, view IP details for a routed cat-connected computer. (win+r--input, cmd--input: Ipconfig/all [Remember: IP, mask, gateway, DNS])

②, set on the router, and select static IP in the Setup wizard. Enter the IP to route the cat, other: Masks, gateways, DNS settings.

③, reboot the router after Setup completes.

"Turn on router's wireless function"

1, select the Wireless Settings---basic settings.

2, check "Open Wireless function", click to save.

"Set WiFi password"

1, wireless Settings-Wireless security Settings-select "Wpa-psk/wpa2-psk".

①, authentication type: Automatic.

②, encryption algorithm: AES.

③, PSK password is the wireless password. Set to the required password.