What's the reason for the mouse not moving after the computer is turned on?

Many users have encountered such a computer mouse failure situation, the computer boot after the mouse is not moving, with software testing the motherboard, did not detect the problem. After reloading the system, the mouse normal use after a period of time and then appear before the problem, or after the boot can not be used, the other mouse plug I can use the host, my mouse on the other machine can be used.

found that the motherboard needs to modify the inside of the BIOS settings, because the BIOS settings inside the set up a USB interface can be connected with the power of the USB device, but can not connect the mouse is to pull the mouse jack to plug the mouse will move, the computer boot after the mouse is probably the reason for the following:

1. The mouse itself (product quality problems) to change the computer to try the mouse move not!

2. Interface, bad or bad contact, my computer's mouth on a mouse did not respond

3. Computer power supply or other problems, so that the mouse to lose the normal working environment, equipment power supply is not related to system settings, you can use the following solutions:

After the computer boot into the system again, perhaps because the advanced power management function caused the USB device can not power, please right-click on "My Computer", and then click "Properties", enter the "Hardware" page of "Device Manager." Found in Device Manager: Universal Serial Bus----will see the "USB Root Hub" option when it is expanded. Double-click to open, and then in the Power Management option, remove the hook in front of the "Allow computer to turn off this device to save power" option. (This is actually a Plug and Play device power management, of course, including USB power management, remove "Check in front of options" means not to turn off the device power.) ), to this, the failure has been basically resolved!

4. Break Conflict on hardware

5. Is the above also said the mouse work surface media, such as glass mirrors such reflective too strong, the phenomenon is will not move or jump, because the mouse is red, so the red surface of course the effect is not good, the surface scattering too much also not (in fact, ordinary computer table is not a problem)

6. System inductive connection problem (Common solution: Press F8 at power-on and select "Last Known Good Configuration" to enter the system!) Suggest the best is to check the virus, see whether the computer virus infection!

7. Use the keyboard to open "My Computer" management "Device Manager" mouse and other settings to see if it is disabled or Universal serial port view, enabled.