When the hp computer is turned on, it shows that it is preparing for automatic repair. If it cannot enter the system, it cannot be hp.
HP machine solution:
When the instance is shut down, press the power button to start the instance. Immediately, click the F11 button multiple times to go to The WinRE page. Select troubleshooting → advanced options → start setting → restart → Press 4 to go to safe mode. If the security mode is enabled, delete the recently installed software and plug-ins and take anti-virus actions. Restart your computer.
If the security mode cannot be entered, or the system still cannot be accessed after restart, it is recommended that you reset the system. When the system is shut down, press the power button to start the system and immediately click the F11 button multiple times to enter the WinRE interface, select "Troubleshooting"> "reset this computer"> "keep my files ".
If the reset fails, use HP Recovery Manager to restore the system to the factory state: Shut down, press the power button to start the system, and click ESC multiple times in a row, after you see the F1, F2, F9, and F10 menus, press F11 to enter the WinRE interface, select troubleshooting → Recovery Manager (Recovery Manager) → system recovery on the left → restore without backing up your files → next. The recovery time is related to the hardware configuration ~ 2 hours, 4 ~ No additional hardware is required during the restoration process. We recommend that you do not connect to the Internet. Connect to the Internet after recovery.
If the system Recovery on the left side of the Recovery Manager cannot be used, or the F11 WinRE interface cannot be accessed, you can access the Internet on the computer. In5. ShareDownload the system image, start the USB flash drive, and reinstall the notebook quickly. The C drive file cannot be lost.
Other machines, such as Lenovo and dell, have the following solutions:
In this case, the system file is damaged and the system is incomplete. Therefore, the system automatically tries to fix the file when it is started. If the file cannot be repaired, the system file is irreversible. There are basically three reasons:
First, some system files are deleted or damaged by mistake during the last correct use of the computer.
The second reason is that the installed software or plug-in is incompatible with the system.
The third possible cause is system failure caused by viruses.
For the second and third cases, you can press F8 immediately after the instance is started (press it immediately after the instance is started, and press it several times to enter the instance. If this is not the case, you can directly check the third step ), select "Last correct configuration" to enter the computer. If not, press F8, select "safe mode", and then delete the recently installed software and plug-ins to prevent viruses. In the first case, if you know what files are deleted, you can download the missing files and follow the second step to go to "security mode" to add the missing files; if you do not know which system file is deleted, you can only reinstall the system.
windows10: www.5sharing.com/android/windows/25.html
Welcome to the public account [5 Share] (fivsha ). Provides troubleshooting technical support.