Where does the Samsung S7 sm-g9308 (6.0.1) free from interruption mode open?

The Samsung Galaxy S7 sm-g9308 supports the no-disturb mode, which allows all incoming calls and notification sounds to be muted except for the selected exception. To use this mode, follow these steps:

1. In standard mode, slide to the left of the main screen page.



2. Click "Settings".



3. Slide up the screen and click "No Disturb".



4. Light the "now enable" right slider switch.



5. Click "Allow exceptions".



6. Select Allow exception settings, here to choose "Custom" as an example.



7. If the "alarm clock" on the right slider switch, will set the alarm clock to allow the exception of the program.



8. If the "Repeat Caller" right slider switch is lit, the same phone number will be allowed to be paged in more than 15 minutes.



9. Click the "Contact person below", you can set up to allow an exception to the call, here to select "Contact only" for example.





10. Click on "information source" to set the information that allows exceptions, here to select "Contact only" for example.





11. Light the "Event/Task Reminder" right slider switch to enable notifications and other calendar events from the S calendar.



12. Slide up the screen and light the "reminder" right slider switch to allow reminders from applications that support reminders.



13. Click on "Priority Application Notification".



14. Select an application setting as a priority to disturb, here to light the "e-mail" right slider switch for example.



15. Return to the "Do Not Disturb" settings interface, light "on schedule" to enable the right slider switch, you can automatically enable and disable at the scheduled time to avoid interruption.





Note: When "Enable on schedule" is turned on, the default setting is to enable the No-disturb mode on the 07:00 day to 22:00 to the next, click "Days", "Start Time" and "End Time" to set the number of days and times to enable the free of disturb mode.

After the above operation, the free from Disturb mode is set successfully, and the set start time will be automatically enabled.