Which two pins can be used for ATX Power Supply transient connection?

Do you want to enable a power source without a motherboard?
20 pin atx has a sticky port on it, which is facing itself. Then, the number on the left is 4th in the lower row, and the number on the right is 4th in the lower row.

Green and any one black. Black is the ground!

Note:
1. The PC power supply is a conversion power supply, and no-load will burn out or start protection. Therefore, when detecting the power supply, you must mount a hard drive or optical drive for load. Otherwise, the power supply or no output will be burned out.
2. The ps_on and power splitters enable the ATX switch.

ATX main power supply motherboard connector [Dual-Row 2*10 20-hole masterbatch]
(The head of the power plug is raised to a double-row angle of 10 columns. The hole opens to itself. 1 On the right and 11 on the right)

1 + 3.3 V orange
2 + 3.3 V orange
Black 3
4 + 5 V red
Black
6 + 5 V red
Black 7
8 power_good gray
9 + 5vsb (Backup) Purple
10 + 12 V yellow

11 + 3.3 V orange/brown
12-12 V blue
Black 13
14 PS-ON green
Black
Black 16
Black 17
18-5 V White
19 + 5 V red
20 + 5 V red

ATX auxiliary connector [commonly known as P4 connector, single-row 6-hole master connector]


1 place black
2 place black
Black 3
4 + 3.3 V orange
5 + 3.3 V orange
6 + 5 V red

ATX Auxiliary Fan/fireware connector [Dual-Row 2*3 6-hole master head]
(The plug hole is self-oriented and the convex head is facing to the right. The appearance is regarded as two columns and three rows. The first row above is marked as No. 1 on the left and the fourth row on the right)
Fanx = Fan Power Supply
1394 = firewarw Power Supply

1 Fanm white
2 FANC white/blue stripes
3 + 3.3v detection of white/brown stripes

4 1394r white/black stripes
5 1394 V White/red stripes
6. Retain

ATX power supply pin Diagram

The ATX power supply pin map found on foreign websites is doing well, so it is reprinted.
Pin-out: ATX motherboard power

ATX power connector on the motherboard consists of two row of pins.
This connector from The ATX power supply can only be fitted in one way.

Image Attachment: ATX. jpg (, 42.1 K)