Whitening and grinding the image by calculating the distorted figure
The use of selection whitening method is very practical, but the operation may be a bit troublesome, need to use the calculation and channels such as the face of the figure, pink and other parts of the dark or high light, and then appropriate with the color matching tool whitening. This kind of whitening picture is very natural.
Original
< small map view big picture >
Final effect
1, open the original material, press CTRL + J to copy the background layer one layer.
2, execution: image > Calculation, parameter settings as shown below (calculated by calculation of the desired selection, and then to adjust the brightness, is the skin looks more transparent), observation of the original figure found that the color of the color of the middle red tone, the use of red channel and gray to calculate.
3, the operation of the ALPHA1 channel, the face of the high light part of the darker, This is exactly the constituency you want.
4, execute again: image > Calculation, parameter set as shown below. The aim is to increase the contrast.
5, calculated to get the ALPHA2 channel, Ctrl-click the ALPHA2 channel to load the selection, and a warning appears: no pixels greater than 50% Select the selection will not be visible direct point determination. The
6, return the RGB channel, convert to the layer board, Create a curve adjustment layer, adjust the RGB and red channels, and set the parameters as shown below.
&NBSP;
7, the impact on the background is not small, if you feel that the background is also highlighted, you can in the curve layer of the blind, with a black brush smear characters outside the part.
8, create a new layer, press CTRL + ALT + Shift + E-stamped layer. For grinding, sharpening and other details of the adjustment.
9, create the level adjustment layer, the parameter set the following figure.
Final effect:
Layer Reference:
Category:
- PS Image Processing
- PS Grinding Course
- PS Whitening Tutorial