Win10 can't set up the router what to do win10 tutorial on how to set up a router

The steps are as follows:
1, disconnect the router and the telecommunication Light Cat connection, will connect the computer to the router (1, 2, 3, 4 any one interface) the network cable pulls back to insert;
2, at this time we can open the browser to enter the address of the router, you can log in, in order to prevent late conflict, according to the Settings Wizard set the login account password, click "Network Parameters"-"LAN port Settings";

3, in the "IP address" Fill in the following: 192.168.x.1 (X can be any number of 2-255), after setting to remember the IP address, because later if you want to set up the router will need to use the IP address we have just set to enter (late forget IP address can only be reset by the router to solve) click "Save ”；

4, after the completion of the setup, we will reconnect the cat to the router's WAN port can be connected to the Internet, you can also use the IP address just set up directly to open the router, there is no conflict and lead to access to the router settings interface.
The above is also the WIN10 can not set the content of the router solution, such as you use the router, also appear routers can not be set, according to the above steps to operate, as long as your problem can be solved.