WIN10 blue screen prompts error code 0X000000C2 solution

The workaround is as follows:

System problems, use the system to install the disc repair system or use the Sfc/scannow repair system in the system; If you still can't solve the problem, you can only reload the system.

Second, the system files are deleted anti-virus software, such as Kabbah anti-virus software sometimes mandatory to delete infected system files or drivers. This causes some system files or drivers to be damaged or lost, resulting in blue screen code 0X000000C2. This can also be a problem with the system, which requires reloading the system to solve the blue screen failure.

System Repair Operation Process:

1, first the repair of the CD into the CD-ROM drive, and then restart the computer, hold down the F12 key will be from the CD drive into the system, or into the BIOS, through the BIOS set the optical drive for the first boot mode. After the optical drive is driven, the press any key to the boot from CD appears ... , please press any key.

2, about a minute later, the system appears welcome to use the Installer menu, the menu contains the following three options:

(1) To install Windows now, press the ENTER key.

(2) To use the console repair, press R.

(3) Exit the installer, press F3.

3, press the R key to choose to enter the "Recovery Console";

4, the system prompts to select the Windows installation partition, generally by default is installed in the first partition, select, press ENTER to determine.

5, the system prompts to enter the administrator password, if the administrator password is blank, then type the ENTER key directly.

6, at the system prompt, such as "C:\WINDOWS\", enter disable CNSMINKP carriage return.

7. Enter exit to restart the computer

Third, the system BIOS setup error, the BIOS is to support the first level of computer hardware software. Once the BIOS setup error, such as CPU severe overclocking, and so on, there will be blue screen code 0X000000C2 and other failures. BIOS setup Error You can try to restore the BIOS to the factory settings.

In summary: If you have recently installed the software or installed a new hardware driver, you can uninstall it in Safe mode to try.

If everyone in the WIN10 system encountered blue screen error "0X000000C2", then you can consider from the above three aspects, we can step by step to troubleshoot errors, and ultimately solve the problem. Thank you for your reading, hope to help everyone!