WIN10 Official 10074 Preview version of the U disk Boot installation Method tutorial

Similar to the CD-ROM installation method, this method is more flexible and is not limited to the operating system currently in use. can be installed single or dual system, can install 32-bit or 64-bit. UEFI and traditional BIOS two modes are also supported.

U-Disk Installation Win10 method detailed:

After downloading the image, install the Rubik's Cube (click here to download), in the Rubik's Cube "Application Encyclopedia" to find the Rubik's Cube disk launch, the following figure

Follow the tips in the picture, just choose a good u disk (be sure to look carefully, do not choose the wrong!) and mirroring, click "Start Production".

Note: If prompted to destroy U disk data, please confirm that the U disk is not the wrong choice, point OK.

After making the startup disk, restart the computer. Choose to boot from USB to enter the installation environment. General brand machines have the option to start the media shortcut keys, these shortcuts are usually F12 and so on, the boot appears brand machine logo after pressing the shortcut key, and then in the list of the occurrence of the choice of USB or removable similar options can be started from the USB, as shown in the following figure

If you cannot find a shortcut key, you can display the brand logo in the screen when pressing DEL,F2,ESC button to enter the BIOS setup interface, in the BIOS settings to find the boot-related settings option, the USB or removable option set to the first boot option, and finally press F10 Save and exit. See the figure below for concrete operation. Note that there are differences in computer operation methods, you can search the Internet to search for the corresponding model of operation.

▲ Select startup settings (boot configuration) option.

▲ After entering the setup option, select the Startup priority setting option.

▲ Adjust USB device (removable Dev.) For first boot device

▲ After the setup is complete. Press F10 and select OK to save the settings and reboot.

▲ Once again reboot can enter the installation environment. Follow the prompts to operate, you can refer to the fastest and simplest! WIN10 Preview version of the hard drive installation method detailed in the 3rd step.