WIN10 system Computer Set local static IP method tutorial

WIN10 set local static IP method steps:

The first step: first in the Win10 right corner of the network icon, right-click the mouse, in the pop-up menu, click Enter “ Open Network and Shared center &rdquo, as shown.

Step two: After opening the network and Sharing Center, click on the network name that has been connected to the right, as shown.

Note: Small series is wireless network, if it is the local network of cable, click on the local network or click on the left “ change network adapter &rdquo, and then find the current computer network, on its right, select Properties, is the same.

Step three: In the next Open Network status interface, click “ Properties &rdquo, as shown.

Fourth step: In the Network property interface, and then click to select the “internet version of the Protocol 4&rdquo, select and click on the bottom of the “ properties &rdquo, and then you can perform WIN10 static IP address settings interface , as shown in figure.

WIN10 set Local IP address considerations:

Here, set Win10 static IP address is very simple, under the general, first select “ use the following IP address &rdquo, this is the local IP address settings, where the main IP address, subnet mask , The default gateway three settings option, these three items can not be disorderly fill out the settings, need to be based on the local area network gateway information.

Where the IP address, we need to set the static local IP address, this address, to be set according to the gateway address, subnet mask do not need to fill out, as long as the IP address is filled out, click one of the following subnet mask box will automatically generate, and the default gateway equivalent to the router login address, Here simple to teach you how to obtain the computer local IP address, child mask and gateway information, convenient for everyone to fill out.

1, use Windows + R combination shortcut key to open the Run dialog box, and then enter command cmd and then click on the bottom of the “ OK ” Open, as shown.

2, in the Open cmd Command box type input command: Ipconfig finished, press ENTER to run, and then you can find the current IP address, subnet mask, default gateway and other information, such as figure.

Note The default gateway address here, such as the network on the previous figure, the default gateway address is 192.168.1.1, the automatically obtained IP address is 192.168.1.101, and the subnet mask is not to be used. With this information, we can set the WIN10 local IP address, as shown below.

The default gateway fills in the same as above, the above amount of IP address, according to 192.168.1.* (* on behalf of the user can change the variable, the value can be 2-254 any number, pay attention to the same as other computer IP address, otherwise there will be conflicts, resulting in network errors), For example, the IP address set by the small series 192.168.1.110, when finished, click on the bottom of the OK, it can be.

Note that the static IP set, the following DNS address also need to set manually, here is not known to fill out a friend, you can write the universal 8.8.8.8 and 8.8.4.4, you can also fill out the Aliyun public DNS address or Baidu Public DNS .