Win2003 3389 Manual Modification method _win Server

Next, let's look at how to prevent hacking by modifying the default port.
As we all know, remote Terminal Services is based on port 3389. Intruders usually scan the host open ports first, and once they are open to port 3389, the next step is to invade, so we just need to modify the default port to avoid the eyes and ears of most intruders.
Step: Open "Start → run", enter "regedit", open the registry and go to the following path: [Hkey_local_machine--system
Currentcontrolset--control--terminal Server
WDS--RDPWD--TDS--TCP] Did you see the Portnamber value? The default value is 3389, modified to the desired port, for example, 6111.
Then open [HKEY_LOCAL_MACHINE
System--currentcontro1set--control--tenninal Server--winstations--rdp--tcp], modifies the PortNumber value (default is 3389) to Port 6111.
After the modification, restart the computer, the remote login at the time of the use of port 6111 can be.
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Terminal Server\wds\repwd\tds\tcp, did you see that portnumber? 0xd3d, this is 16 into the system, is 3389, I change ... This value is the default value of the RDP (Remote Desktop Protocol), which is used to configure the newly created RDP service, and to change the RDP service that has been established, we go to the next key value:
Hkey_local_machine\system\currentcontrolset\control\terminalserver\ Winstations there should be one or more like rdp-tcp (depending on how many RDP services you have built), as well as getting rid of portnumber