The first method: modifying the port by modifying the registry
1, change the port:
Simple steps: Open "Start → run", enter "regedit", open the registry, go to the following path:
[hkey_local_machine\system\ currentcontrolset\control\terminal server\ wds\rdpwd\tds\tcp], see
Portnamber the value? The default value is 3389 (decimal display), modified to the desired port, example 11223
2, again open [hkey_local_machine\system\currentcontro1set\control\tenninal server\winstations\rdp-tcp]
, the PortNumber value (the default is 3389) is modified to the Port 11223 editor to restart the computer to take effect.
Note: You must reboot before you can enter into effect set two ports to be consistent
3, the installation of the firewall; Control Panel-–windows Firewalls
Settings for Firewalls
Confirm that the reboot is in effect. Step two and step three can be reversed, but the set port number must be the same value.
Whether the port has been opened on the native test
telnet localhost 60000
Test whether the remote 60000 port is turned on
Telnet < remote ip> 60000
Client Connection method
1, open the Remote Desktop Connection: xp/2003 under the operation of the input "MSTSC" can be.
2, the connection format: IP: Modified port, such as 10.10.10.10:60000
The second way: by software modification
Download Address: http://www.jb51.net/softs/37339.html
Software http://s.jb51.net for reuse under windows
Through software modification links can refer to this article: through the software modification Win2003 default Remote Desktop Connection port 3389