Win7 32-bit system display color calibration screen calibration function and use method

I. The work to be prepared:

Make sure the monitor is set to its original resolution, which can help improve the accuracy of the calibration results.

Second,Win7 32-bit system display Color Calibration screen calibration function of the specific use of the steps:

1, first press "Win+r" to open the "Run" window, and then enter the "DCCW" command, after the carriage return;

2, then in the pop-up Display Color Calibration window, according to the system prompts click Next, and then to the "Welcome to display Color Calibration" interface to start setting;

3, the mouse to move the window on the left side of the slider, so that the right figure circle small dot visibility minimized, and then click "Next" continue to set to the next interface;

4, then move the bottom of the 3 slider, until the gray bar to remove all color bias correction, after completion click "Next" until completed;

5, then check "click Complete to start the ClearType tuner---", and then click Finish;

6, in the ClearType text Tuner check the "Enable ClearType" option, this time will be completed on the Monitor text tuning, click "Finish" on it, so the picture, the text will be the best results displayed.