WIN7 Connection Network hint cannot find the broadband connection how to solve?

Recently, there are Win7 system users, in connection with the network when prompted not to find a broadband connection, resulting in the network can not be connected. So, what is the cause of this? In response to this problem, small series summed up the following reasons and solutions, let's take a look.

　　The problem of not finding a broadband connection can be found in the following ways:

1. Network card failure or NIC driver not installed properly

2, the network is disabled

3, created dial-up broadband connection did not create a good

　　Solution:

1. Enter the Device Manager, check the network card driver is installed normally, at the same time to see if the network card is disabled, right button "computer" select "Management" and choose "Device Manager", under normal circumstances, in the Device Manager is the case, the following figure.

The image above shows the normal NIC status, if the driver is not installed or disabled, there will be a yellow exclamation point or red disable slash, if it is a driver, it is recommended to download the corresponding driver according to their own network card type, and then copy over to install; If the NIC is disabled, then right click Enable.

If the Device Manager checks everything correctly, it may not be possible to create a broadband connection, it is recommended to remove the original, and recreate a broadband connection.