Win7 make Ubuntu system install boot disk and USB stick install Ubuntu whole process

After I broke the two systems, everything had to start all over again, and this time, the computer was a bare-metal piece. There is no way to re-win7 it. This must first do a win7 boot disk, and then install, can only say that I do not have the technology, can not be win7 fix. Let the great God to install the Win7, he let me use Wubi installed Ubuntu, but self-feeling that too boring, so secretly put Ubuntu installed. Some people say I can do nothing, hehe. No regrets, the steps are as follows:

I. Making ubuntu install USB flash drive 1. Pre-Installation Download ubuntu12.04 image file, address: Http://www.ubuntu.com/download/desktop/zh-CN Download production tool: Universal -usb-installer-1.9.1.4.exe–october 23, 2012 tools: http://www.pendrivelinux.com/ universal-usb-installer-easy-as-1-2-3/#button 2. After the production of the USB disk Startup disk is downloaded, it can be run directly, showing the supported Linux versions (not fully displayed):

Open the download the latest version of the tool, click "I Agree".

Is the most important window of this USB installer, the Linux version selection is done in this window.
With the three-step setup, you can start making.

Select the Linux distribution you want to build in step 1.
In step 2, select the location where the Linux ISO is located.

Click "Creat", will pop up a prompt, the operation of the USB flash drive steps. It is important to note that the first step in the hint is to format the USB drive and format it as a FAT32.
Point "is (Y)", you can do without the tube, hehe, a few minutes later can be finished production.

is to perform the following steps:

After a few minutes, the finished production, the point "Close" can be made.

After the production is complete, the USB stick displays:

Contents of the USB flash drive:

3.ubuntu system installation settings USB flash drive, open USB drive installation Ubuntu12.04 Tour: choose Ubuntu installation

Select the installation language

Tick in front of the red area to install some basic software

Choose whether to connect to the network, it is recommended not to connect, because the connection will be installed at the same time download some updates, seriously affect the process OH

This step people do not neglect, maybe a lot of people will choose the first bar, actually is the third Oh, point continue

The following is the most important link, the disk partition

Disk partitioning principle: Only 4 primary partitions can exist on a hard disk of an MBR partition table type. If you need more than 4 disk blocks on a hard disk, you need to use an extended partition. If you use an extended partition, you can have up to 3 primary partitions and one extended partition on a physical hard disk. An extended partition cannot be used directly, it must be partitioned into a logical partition for the second time before it can be used. A logical partition in an extended partition can be any number. Therefore, when the partition is accidentally, it will appear unusable situation. In this case, we suggest dividing the logical partition first, that is, dividing/swap first.

/boot partition General 200M is enough, "/" 20G can be,/swap space should be greater than or equal to the size of physical memory, the minimum should not be less than 64M, the size of the swap space should be 2-2 of physical memory. 5 times times.

As for home, it's your mood!

Double-click "Idle"

will appear: Here is the "/boot", "/", "/Home", "/swap" Partition the steps are the same.

Just "/swap" Partition is not selected "EXT4 Day to File system", in the drop-down menu select "Swap Space".

Set the partition, the next step is critical! First look at the number of the "/boot" partition you created, such as my "sda10" (your not necessarily this, depending on your "/boot" partition number). Then select "Sda10" in the "Device to install boot area" drop-down menu below, if this step is ignored, then use Ubuntu to boot Windows.

The bottom of the can be relieved, is nothing more than a set of users, passwords of these. Linux is required to have a password.

After you restart your computer, you will find that you have entered Windows again. Don't panic. This is normal. I thought I didn't fix it, and I re-installed the system again!

After entering windows, download a software "EasyBCD", in order to add an entrance to Ubuntu, or not to go to Ubuntu.

After downloading, open the software, select "Add New Entry", select "Linux/bsd", name that line casually write, I write "ubuntu12.04"

This line of device selects the "/boot" partition of the 200M that we just created, with a Linux tag in front of it, such as:

Haha, restart the computer, choose Ubuntu OK!

In my writing this article, suddenly found that I want to write something and the keyboard does not correspond, after the advice of the Aunt I know, originally installed when I forgot to choose the keyboard!!

Scare me, I thought I had to re-install the system! But then with the help of the aunt found a solution: Click "System Settings", "Keyboard" and "Layout settings", I saw, I was

The Dutch language is chosen!! The time is limited, first knock to this.

Came back this morning to knock the program, with the pure character interface (my habit), the results found that the keyboard settings in this does not work at all, here is the "Dutch"!! (My friends and I were stunned) later I know the Change method:

In the graphical interface command line input: "sudo dpkg-reconfigure keyboard-configuration", then OK, follow the sequence step by step to be good

Enter after entering the command line, and then calm down.

Win7 make Ubuntu system install boot disk and USB stick install Ubuntu whole process