Win7 Prompt Diagnostic Policy Service does not run inability to diagnose check network resolution

Win7 Prompts the diagnostic policy service not to run an inability to diagnose the network resolution. In Win7 systems, when a network failure is common, we use Network Diagnostics to check the problem. However, sometimes the diagnostic policy service is not running when you use Network Diagnostics, causing the network to fail diagnostics. So how do we deal with this? Next, please follow the small weave to see.

The workaround is as follows:

1, start → run → input: services.msc Click OK (or press ENTER) to open the service.

2, in order to find in the service: Diagnostic Policy Service ▶ such as not open, right button to start.

3, if the boot is not (at this time the menu is gray), that is, the startup mode is not correct, double-click the service, or click on the property to open the service → start type → Click to adjust to Automatic or manual → application → start → OK;

4, in addition to diagnostic Policy service needs to be opened, you can also open the following two services:

Diagnostic Service Host

Diagnostic system Host

5, if the open service appears, and there are: error 1079, such as tips, you can click the Service Login tab, the current account coverage can be.

That's Win7. Unable to diagnose check network prompts the Diagnostics Policy service is not running the processing method, through the above method, the network diagnosis can be used normally.