Win7 prompt system resources not enough to complete the request service what to do

When we use the Win7 computer, we will encounter "insufficient system resources, unable to complete the requested service" prompts this type of problem, resulting in many programs are not functioning. There are many reasons for this problem, so how to solve the problem? The following is a small series to introduce you to the WIN7 system resources are not sufficient to complete the request service solution.

　　The workaround is as follows:

1, from the caller's screenshot, this is a network adapter exception.

2, the first time to update this network adapter driver. The most match is the device's own driver CD, followed by the device website download matching driver also line.

3, finally, the use of Third-party software to update the driver. Because at this time the computer has no net, so need to go to a good computer download with universal network card driver software, save in the U disk, and then insert the problem of the computer for Automatic Updates. such as driving the wizard, driving life, and so have their own universal network card driver version.

4, also encountered such a problem, a third party automatically updated software said is already the latest driver, no need to update (using wired broadband, update wireless driver). Another software gives the correct network card driver, which solves the wireless network to identify all wireless networks, but can not identify their own wireless network signal problems. So, back up the NIC driver in time so that the system can be restored with it.

5, if the NIC driver update or not, may be the operating system problems caused.

If the Win7 operating system, you can use the repair system: Start → run → input: CMD Click OK (or press ENTER), open the Command window.

6, enter the repair command in the command window: sfc/scannow (carriage return execution)

7, in addition, disk abnormalities can also cause such problems. If it is a mechanical disk and has never been defragmented, you may wish to defragment the system disk (usually the C disk).

8, disk self-test is also possible, because the disk bad track can also cause errors in the program. The steps are: Right click on the c disk → properties → tools → error → start check (System disk may be restarted after reboot, require user to confirm)