Win7 system boot prompts CPU variable MTRR Configure failed solution. Win7 system boot encountered a problem has been very common, this does not have a user said his notebook Win7 flagship system boot TIP CPU variable MTRR Configure failed error, looking at a large string of English, do not know how to solve? Everyone, don't panic, You can find the cause of the failure according to the hint code, and then solve the problem with ease, let's take a look at the steps below.
Reason Analysis:
MTRR is the abbreviation for the memory type range register, which is translated as a storage area type register, which provides a policy for reading and writing a range of physical memory to optimize CPU data transfer performance. For example, the MTTR can be set to the memory of the address range using the "writecombining" strategy, the CPU can be on the PCI/AGP bus, many times a small number of data written into a large set of data to write, so as to get more than 2.5 times times the speed of image transmission.
Solution:
First, The software configuration has the problem, causes the system to complain.
The solutions are:
1, restore the BIOS defaults, and even update the BIOS.
2, restore the system, if it is a 32-bit system, it is recommended to reinstall the 64-bit system. WIN7 64-bit system download
Second, incompatible memory installed, or the machine does not support the capacity of memory. This error is to note that the memory is not installed in the near future, pay special attention to whether this machine support the capacity of memory, otherwise prone to this error, recommended to remove memory test.
If you also encounter the same problem, refer to the above two methods can be easily resolved, I hope this tutorial can help you.