Win7 System computer installation connect two routers to solve the problem of network lack of solution

Many friends use the notebook win7 system to connect the network often encounter the network is not enough to use the situation, someone asked if the Win7 system computer router can be installed after a router after the word is good, can solve the problem of network not enough, then this idea can be achieved? The following small series for everyone to bring the solution link for everyone to understand.

First, set the 1th router: (as the primary router)

One end of the network connection router, the other end of the computer network port.

1, open the browser, enter 192.168.1.1, enter Username: admin, Password: admin

(The IP of the general router is 192.168.1.1, username: admin, Password: admin.)

Visible router device next to or bottom, generally have write. )

2. Click the Quick Wizard and follow the instructions.

Interface type: PPPoE

Enter the broadband account number and password

3. Select the DHCP service menu to open the DHCP service.

Set up, and then one end of the network to pick up the cat's LAN port, one end of the router's WAN port.

Second, then the 2nd router to set up (as a switch)

One end of the network connection router, the other end of the computer network port.

1, open the browser, enter 192.168.1.1, enter Username: admin, Password: admin

(The IP of the general router is 192.168.1.1, username: admin, Password: admin.)

Visible router device next to or bottom, generally have write. )

2. Select the DHCP service menu and turn off DHCP.

3, select the LAN port, enter 192.168.1.100, as long as the 1th wireless router IP is not the same

4, after setting up, and then using a network cable one end of the main router LAN port, the other end of the LAN port connected to the router

Note: The WAN of the secondary router

Related reading:

How do I open the Administration page for the Win7 router? Win7 How to open the management page for a router

The above is to Win7 system computer installation connected to two routers to solve the network is not enough to solve the whole content of the introduction, in fact, the setting method is relatively simple, not everyone imagined so difficult, I hope the above tutorial content can help everyone.