WIN7 System install HP5200LX printer with its own driver?

HP5200LX Drive installation for WIN7 system with self-band

1, first connect the USB cable (line not too long, within 2 meters), in the equipment and printers will come out of a 5200LX icon, above the yellow exclamation mark, the following figure 1

2, on the 5200LX icon, right key properties, pop-up the following interface. Figure 2 Below

3, select the hardware, find generic IEEE1284.4 printing support selected, click the Properties, the following Figure 3

4, select the driver, choose to update the driver, the following figure 4

5, pop-up the following interface, choose to browse the computer to find the driver software, the following Figure 5

6, select from the computer device driver list, next. Figure 6 Below

7, select the printer in the common hardware type, next. Figure 7 Below

8, the left manufacturers select HP, the right printer model selection hp Laserjet 5200 Series PCL5, select Next. Figure 8 Below

9, appear the warning prompt, click is. The system will automatically install the driver. Figure 9 Below

10, Prompt installation success, click Close. Figure 10 Below

11, at this time in the equipment and printers, 5200 of the driver icon does not have a yellow exclamation mark, the display is HP Laserjet 5200 Series PCL5. On the icon, right-click the printer properties and print the test page in the lower-right corner. Check to see if the printer can print. Figure 11 Below