Win7 System USB wireless network card driver how to install

for desktop computers or netbooks that do not have a built-in wireless network card, the wireless network can be connected to a desktop computer by purchasing a USB wireless network card, then plugging in the USB port of the computer, and then installing the UBS Wi-Fi card driver. For a desktop computer, the key to the wireless network is the installation of a drive for the UBS Wireless network, which, like the laptop, is connected to the WiFi wireless network as normal.

USB Wireless network card driver How to install Tp-link wireless network card driver installation tutorial

This article, small series to Tp-link USB wireless card For example, teach you how to install USB wireless network card driver, the specific steps are as follows:

1, first plug the USB wireless network card into the back of the desktop computer chassis USB interface, it is best to plug in the chassis on the back of the USB interface, do not plug in front of the chassis interface. Also, plug in the USB2.0 interface as much as possible.

In addition, desktop computers for the first time to install the UBS Wireless card driver, need to download, so also need to insert a network cable, so that desktop computers can access the Internet, easy to find drivers. Of course, if the desktop computer has no network cable, you can also look at the purchase back of the UBS wireless card brand model, and then go to other computers to download the corresponding model drive to the U disk, and then get back to install.

Because of the small desktop computer next to the router, so you can directly plug online. Here's how to download USB Wireless card driver.

2, the Tp-link UBS wireless network card into the back of the chassis after the interface, and then the computer on the Computer right button, click to open Device Manager, as shown.

After you open Device Manager, check to see if your computer has identified the wireless card device. Normally, you can find a device that does not have a drive installed, which is the wireless card that just plugged into your computer, as shown above.

If the computer does not recognize the new device, the wireless card may not be plugged in, another UBS interface to try again.

3, confirm that the computer can recognize the USB wireless network card, the next can be installed driver. The installation of USB wireless network driver is not difficult, can be directly online to find the corresponding brand model of the driver download, can also use the Driver Wizard, Lu master tools such as online installation. Below, the small series is the Master of Lu, first open Master Lu (no, early download installed well). After opening, click on "Drive Detection", as shown below.

4, then you can detect a USB card driver need to install, click on the following "Installation" can be, as shown in the following figure.

5, waiting for USB wireless network card driver installation completed, you can unplug the network cable inserted in the computer, and then click on the computer desktop taskbar in the lower right corner of the "wireless icon" to search WiFi wireless network, then select the wireless network need to connect, and enter the password connection, you can access the Internet, as shown in the following figure.

Once you have successfully connected to a WiFi wireless network, your desktop computer will be able to use the wireless Internet as well as your laptop. In addition, the desktop computer can be moved farther away from the location of wireless internet, so that desktop computers can be completely away from the network cable.