WIN8 Wireless network card search is not a signal solution

Pre-Win8 Chinese version of the system, wireless device driver normal, but not the search signal. Flight mode is confirmed to be off. As shown in the following illustration:

Analysis Reason: Win8 system setup added to the wireless network card control, need to enable to connect wireless networks.

Solution:

1. Open the Super button and select "Settings". You can move to the top right corner of the screen with the mouse to open the Super button, or by pressing the keyboard "Windows logo key" + "C" key to quickly open;

2. Click on "More Computer settings"---"Wireless" menu;

3. Click on "Wireless Settings" under the small slider to open the wireless function;

4. After the completion of the setup found that the network list can search the wireless signal;

If the network list displays the following information, check to see if the Wireless Management Service (WLAN AutoConfig (WLANSVC) service) is started;

WLAN AutoConfig Service View method:

Right-click in the taskbar space to select Task Manager;

If shown as a brief information pattern as shown in the following figure, click "Detailed Information";

Click on the "Services" tab to find the Wlansvc (WLAN autoconfig) service to see if the "Status" column is displayed "running";

If shown as stopped, right-click the service to select Start.

This method can start the service, but if the service is disabled or started manually, the service will not start automatically after restarting the computer. If you need this service to start automatically, you can click on "Open Service" to enter the service management interface, as the following modified to automatically start.

Wireless Internet access requires three levels of Setup to open: physical switches, software switches and wireless services. The wireless LED will not light until the switch is turned on. Check to see if the wireless service is not turned on when the indicator light is on but still unable to search for the wireless network signal.

Operation Steps:

1, open the Service management interface.

Can be opened in three ways

(1) Right click on the desktop computer icon, select "Management", click "Services and Applications", click "Services";

(2) Press the Windows logo key at the same time (keyboard

Logo keys) and r key, open the Run interface, enter services, click OK, the following figure:

(3) At the same time press the CTRL,SHIFT and ESC three keys, open Task Manager, click the "Services" tab;

2. Locate the WLAN AutoConfig (WLANSVC) service, if it is manual or disabled, right-click the service to select Enable (the Task Manager service displays "start").

If you want this service to run automatically after startup, right-click the service Select "Properties", the Startup type is selected as "Automatic", then click "Apply", click "Enable", click "OK" button to close the Settings window. This restarts the computer so that the service can run automatically.

You can set the steps as shown in the following illustration:

Note: More wonderful tutorials Please pay attention to the Triple Computer Tutorial section, triple Computer office group: 189034526 welcome you to join