WIN8 System 80 ports are occupied how to solve?

WIN8 System 80 ports are occupied how to solve?

Solution One

1, open the command prompt-netstat-ano, you can view the local port opening and corresponding procedures;

2, it can be seen that 21, 25 and 80 ports are PID (process identifier) is: 5668 of the process occupied. Now, as long as you know the PID is 5668 of the process can be resolved;

2, open Task Manager, you can see pid:5668 corresponding process for the Inetinfo.exe;

3, the last operation: End the process, restart or stop the IIS "Default Web Site", no matter how Inetinfo.exe will automatically rerun, and then stop the IIS "Default Web Site", run "Black wind Aspweb server" can be resolved.

Note: Process PID can be changed, that is, running the same program at different times, his PID number is different. The PID number of the same process for different computers is mostly different. Therefore, before the end of the Inetinfo.exe PID is a three-digit number, after the reboot, its PID may be four digits. This does not affect the resolution of the problem.

4. Inetinfo.exe: Under normal circumstances, Inetinfo.exe is primarily used to support debugging of Microsoft Windows IIS Network Services. This program is very important for the normal operation of your system. Belong to system components, do not delete! His corresponding system service is the IIS Admin service or the World Wide Web Publishing Service. www.xitongcheng.com If you stop the IIS Admin service, the system automatically stops the World Wide Web Publishing Service, FTP, and SMTP services. is the corresponding 80, 21, and 25 ports above.

5, of course, can also try, restart the computer to try, or reinstall IIS try, but also some people say is the network settings of Kabbah, have time can go to try to see.

Workaround Two

1, if 80 ports are blocked or shielded and other reasons can not use the solution is to use the network-assisted nat123. Through the nat123 port mapping, will be sealed 80 port as intranet 80 port (or switch to other ports), and then add mapping, through the NAT123 binding site application mapping, extranet access or 80 ports;

2, when adding a map, the external network port is 80.