Wince simulator settings

Environment 1:

Windows server2003 visual studio2008

You also need to install Microsoft ActiveSync

Ii. Settings

First, you must set Microsoft ActiveSync to run Microsoft ActiveSync. If Microsoft ActiveSync is not available, a gray icon is displayed in the lower right corner of your computer,

Double-click this icon to display the Microsoft ActiveSync main interface,

Click "file" and select "connection settings". The dialog box is displayed,

If "allow connection to the next one" is not checked, check it, select DMA below, and then click OK.

3. Start and connect the simulator

Open vs2008, click "Tools"-> "device simulation manager", select a Pocket PC 2003 simulator, and right-click the simulator and choose "Connect" from the shortcut menu ",

After the simulator is started, right-click the menu and Choose Insert base ",

At this time, the icon in the lower right corner of Microsoft ActiveSync will change to green, indicating that it is connected and Data Synchronization starts.

Four simulator network settings

Click "start"-> "set" in the simulator, and click the "connection" tab.

Double-click "network adapter", "connect to my network adapter", select default unit settings, "click adapter to modify Settings", and select

Asyncmac ndiswan miniport,SelectIPAddress, click"OK", Prompting" the new settings will be applied the next time the adapter is used. If the adapter is currently inserted into the device, remove it first, and then re-insert the adapter to apply the settings .", Click"OK","OK".

Double-click the connection, select the "advanced" tab, and click "select Network ".ProgramWhen automatically connecting to the Internet, use: "select

Set the unit, click OK, click OK again, and then click X to complete the configuration.

Now, you can access the Internet. Click Start in turn "-->"Internet Explorer"-->"Favorites "-->"MSN mobile",The page appears. If the web page cannot be opened, select the simulator in "device simulator manager", right-click the "Remove base" button in the menu, and then click "insert base ".ActiveSyncOnce the connection is complete.