Windows 7 does not boot "starting interface Safe Mode card in Disk.sys"

Source: Internet
Author: User
Tags safe mode
Pre-installed Windows 8 or Linux system modified Windows 7 o'clock will appear when the card is in the boot Windows interface or secure mode card loading the Disk.sys interface.
Normal start the following figure:
In safe mode, as shown:
Most of these problems are due to the fact that the partition format has not been successfully transformed into an MBR format, please back up your data, install the media using the clean installation version, and use the command transformation format.


Operation Steps:
The workaround is to repartition using the DiskPart tool.
1. Use the Windows 7 CD-ROM or u disk to boot, into the system installation interface;
2. Press SHIFT+F10 or SHIFT+FN+F10 on the interface of the selected partition, and bring up the command prompt;
3. In cmd, enter the following commands in turn, each input line will be pressed to enter;
DiskPart
Select Disk 0
Clean
Convert MBR
Exit
4. Turn off the cmd window, refresh and repartition, and reinstall the system.

Related Article

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.