Windows 7 (win7) system reinstallation and cracking

ArticleDirectory

• I. Create a USB flash drive for Windows 7
• Ii. Install win7 with a USB flash drive
• Iii. Cracking and Activation

Windows 7 (win7) system reinstallation and cracking

May 5, 2013

This tutorial is only intended for beginners. It is a hands-on tutorial. Please ignore it. In addition, familiar with the computer, if you encounter a failure to use ghost backup to restore win7, it may be caused by MB of reserved partitions. For the solution, refer to the content of the next partition.

I. Create a Windows 1.1 USB flash drive and download the image

First, find a win7 system image (an ISO file) from the Internet ). It is worth noting that there are a lot of things. If it doesn't matter, you just need to click Next. After installing it, you can kill the virus or anything. You can use it if you're okay. If you have an original hobby, you need to identify it. You need to find an original image to download, but now many non-original images are impersonating the original image, so you need to check whether the hash code of the image file is the same as that of the original one, the same is the real original version. Otherwise it is likely to be changed.

1.2 burn an image to a USB flash drive

Image creation tool ultraisoportable:

Http://pan.baidu.com/share/link? Consumer id = 166210 & UK = 956582885

First open the software ultraisoportable

Find the location of the win7 system image in the local directory, and double-click the image to expand, as shown in

Start Software

Plug in the USB flash drive (at least 4 gb usb flash drive) to burn

Click "yes" as prompted.

Burning started

The data is automatically burned.

Note:

1. The selected USB flash drive must be a USB flash drive larger than 4 GB;

2. Some USB flash drives may fail to be burned. This is generally a problem with USB flash drives. Try another USB flash drive.

Ii. Use a USB flash drive to install win7 2.1 to set the hard disk Mode

Boot, enter BIOS (different methods, pay attention to the screen prompts, usually press delete, or F2 ). In the bios, find "SATA mode selection" and set its value to "ahci ".

2.2 set the computer startup sequence

Also set in BIOS. For example, set the USB drive disk (usb hdd) to the first sequence boot disk.

Note: in fact, it is okay to choose not to set the boot sequence. When starting, press the screen prompt to open the boot selection menu and choose to start from the USB flash drive.

2.3 partitions

After starting the USB flash drive, select the appropriate options as prompted and click "OK" or "Next". For more information, see.

Select "Custom (advanced )"

Select the hard disk to which the system is to be mounted. Only one hard disk exists. Note that the hard disk is formatted and not partitioned in advance.

Create a new partition as the system partition (also known as the system disk or system drive). Select to partition all the hard disk capacity into the first partition.

As you can see, after the partition is complete, a MB reserved partition is automatically generated, which stores the system boot and startup files. If you have MB of reserved partitions, you cannot use ghost to back up and restore the win7 system. To enable Windows 7 to use ghost backup and restoration as easily as XP, You need to extend the capacity of the reserved partition so that it can be used as the system partition. In essence, it is used to place system files and startup-related files on the same system disk (like XP), so that the backup of ghost is complete.

Expansion steps:

Enter the capacity to be extended. Note that the extended system retains the partition capacity of 100 MB + extended capacity. If you have friends who like integer partitioning, you should pay attention to it.

Now, the extension is successful.

And then perform other partitions. This varies from person to person. It shows that the remaining hard disk space is divided into three partitions. Click "new" and then enter the partition capacity.

Now, the partition is complete. Select a partition (usually the first partition is retained by the system) as the system partition, and click Next to install.

2.4 Automatic Installation and related settings

All of the following settings are not very important. Just set them as you wish. If they are not correct, you can change them in the system later.

After the installation is complete, restart the USB flash drive. If the USB flash drive is in the first boot sequence, remove the USB flash drive at the end of the screen to avoid restarting the USB flash drive again. I have never tried it like this. I remember XP used to do it. There is always no error in unplugging.

The system will automatically perform subsequent installation after restart.

Enter User Name

Set the logon password.

If the product key does not exist, skip this step.

I usually select "Ask me later" as needed"

Set time and date

Select Network

Share configuration. The default setting is good.

Coming soon

The installation is complete.

After installing the system, you also need to install some necessary drivers. You can find the drivers on the Internet. If you want to solve the problem, you can use the following driver genie to automatically detect the required drivers and download and install them (non-advertising, the same is true for software with other similar features ).

Iii. Cracking and Activation

Use the win7 cracking activation tool win7 activation tool v1.7, which is:

Http://pan.baidu.com/share/link? Consumer id = 488619 & UK = 956582885

After downloading and decompressing the package, double-click it and click "Activate.

After the activation is complete, the software will prompt you to restart. You can simply Select Restart to complete the activation. After activation, you can view the activation status from the path: Start> Control Panel> all control panel items> system. As shown in.