The detailed setup steps for the
Windows 8 System wireless network card connection are as follows:
The
first step: Click on the computer desktop in the lower right corner of the wireless connection icon , in the Open signal list to select the wireless signal (check
automatic connection ), and then click
Connect . As shown in the following illustration:
Note: The signal name is set SSID, if you do not confirm the signal name, you need to connect the router via a wired computer, enter the
tplogin.cn into the admin interface in the browser, and click on the wireless settings >> Basic Settings View SSID, click Wireless Settings >> Wireless security settings View the wireless password.
If you cannot find the wireless signal, please click on the reference:
Step Two: Enter the wireless password and click
Next . As shown in the following illustration:
Step Three: The "
whether you want to enable sharing between computers and connect to devices on this network " prompts you to choose "
Yes, enable sharing and connect to devices " as an example. As shown in the following illustration:
Clicking on the wireless signal in the network list will show "
connected ". As shown in the following illustration:
Wireless search to the signal can't even, how to do
If you are using a
Windows 8 system computer to connect to a wireless network, if you receive a search signal and the connection is unsuccessful, you can troubleshoot the problem by following these methods:
If the wireless device always appears to be in connection or is getting an IP address, it is always unable to connect successfully. You can try to delete a wireless profile that is saved on your computer, while ensuring that the DHCP functionality of the router is turned on.
Click on the computer in the lower right corner of the wireless signal icon, in the display of the network list, find the router signal, right click and click to
forget this network , the following icon:
The connection error signal will cause the connection to be unsuccessful, please confirm the wireless signal name (SSID number).
Confirmation Method: Connect to the router management interface via a wired computer and click on the
wireless settings
>> View the SSID in the
basic settings . As shown in the following illustration:
After confirming the signal name, re-search the wireless signal, confirm the search to the wireless signal for its own router signal, try to connect again.
Entering the wrong wireless password will also cause the connection to be unsuccessful, please confirm the wireless password.
Confirmation Method: Connect to the router management interface via a wired computer and click on the
wireless settings
>>
Wireless security Settings confirm the
wireless password in the. As shown in the following illustration:
Wireless MAC address filtering on the router, the improper setting of the rules will cause the wireless connection to be unsuccessful, and it is recommended that the feature be temporarily disabled.
To
set the method: Connect and log on to the router management side via a wired computer and click
Wireless Settings
>>
Wireless
MAC
address filtering turns off wireless MAC address filtering. As shown in the following illustration:
If the password is entered correctly but cannot be connected, it is recommended that you remove the encryption and test whether the connection is successful without encryption.
To
set the method: Connect and log on to the router management side via a wired computer and click
Wireless Settings
>>
Wireless security Settings , choose
not to turn on wireless security , and then
save
>>
reboot . As shown in the following illustration:
When the reboot is complete, the wireless terminal attempts to connect to the signal.
Use a different wireless terminal to connect to the router to confirm that you can access the Internet properly. You can also use this wireless terminal to connect to other normal wireless network comparison tests.
When you use a Windows 8 system computer to connect to a wireless network, if a wireless connection is successful, but you do not have access to the Internet, you can troubleshoot the following methods:
Verify that the computer wireless card is automatically obtained IP address, DNS server address, and access to the same network segment with the router IP.
Confirm Method: Computer Desktop Click on the bottom right corner of the network icon, click Open Network and Sharing Center, in the Network and Sharing Center dialog box in the upper left corner Click Change adapter settings, find wireless connection, right click Wireless connection, click Status >> details. Confirm that the DHCP service is turned on, IPV4 address, default gateway, DNS server address have been acquired.
The router's broadband connection status and firewall settings may cause LAN computers to be on the internet abnormally. Please log in to the router to confirm that the WAN port is connected properly, and turn off the Internet control and other filtering functions.
Use a different wireless terminal to connect to the router to confirm that you can access the Internet properly. You can also use this wireless terminal to connect to other normal wireless network comparison tests.
