Windows Add TCP port forwarding

This paper mainly explains the use of Windows to implement TCP forwarding under the WINDWOS system.

Open cmd and enter the following command:

Add a forwarding Example:

netsh interface portproxy add v4tov4 listenaddress=192.168.1.1 (local IP) listenport=8888 (port on this side) connectaddress= 192.168.1.2 (Peer-to-peer IP) connectport=8888 (port port)

Delete Forward

netsh interface portproxy delete v4tov4 listenaddress=192.168.1.1 listenport=8888

The command is simple enough to test availability at any time. Thank you for browsing this article!

This article is from the "DDos886" blog, make sure to keep this source http://ddos886.blog.51cto.com/13388172/1972831

Windows Add TCP port forwarding