Windows environment using Clover Four blade grass guided dual HDD installation OSX 10.11.5 original image

As a poor college student, want to engage in iOS development can not afford to buy a Mac only Tinker black apples ...

My computer had previously installed a OSX10.10 and win8.1 dual system through a chameleon-guided approach, because learning from the swift language before the OSX10.10.4 (6. Multi-version) was supported only to Swift1.2, so now it's time to install a OSX10.11.5 system to engage in iOS development. The computer hard drive is almost full, so I'm going to put OSX10.11.5 on my mobile hard drive this time. Because the computer has already installed a OSX10.10, so also with the chameleon words out a bunch of weird problems. It's not a rip-off. So this

Not much nonsense say first on my Computer hardware information (if you and I use the same ThinkPad E431 62276HC then congratulations, you can save a lot of things. There are a lot of things that can be used directly with me.

First, the preparatory work

1. Prepare a USB flash drive of more than 8G (the USB flash drive needs to be formatted, so important files are backed up early)

2. Download OSX 10.11.5 image (Http://pan.baidu.com/s/1eS8Yxd4 Thank you to the Vision forum the selfless dedication of the great God Image source: http://bbs.pcbeta.com/viewthread-1691822-1-1.html)

3. Download the tools we want to use (HTTP://PAN.BAIDU.COM/S/1NVS5EXZ)

4. Prepare an additional USB flash drive to make the PE disk (once the problem is used to repair the computer, just in case ...) I don't have any problems with this installation, but it's always right to do a little bit of preparation (the kit has a U-master installation package))

Second, make OSX installation disk

1. Format the USB drive

Make sure your USB drive is a GPT partition (the original Apple image only supports GPT). Convert the USB drive to a GUID partition with Diskgenius (the kit has an installation package) so that the USB drive becomes a GPT partition.

　　　

Open the Tranmac tool right-click on the USB flash drive to format disk for Mac formatted as a USB flash drive for Mac system

　　　

2. Write the image

Right-click on the USB flash drive in the Tranmac tool to restore with Disk Image

Select the image that you just downloaded (that is, the. dmg file downloaded from the cloud disk) to write to the USB flash drive, you need to wait a while.

　　　

Iii. convert the hard drive format to GPT

1. Open Diskgenius Select the hard drive we want to install right-click to select "Convert partition table Type to GUID".

　　　

Four, in the BIOS select from the USB stick boot

First make sure that your PC motherboard supports UEFI, shut down the CMS in the BIOS (specifically CSM or CMS forget ...). I don't remember, it's going to be off anyway. The BIOS of each computer is not the same as the specific operation to ask Niang.

Restart the computer BIOS choose to boot from the USB stick (ThinkPad is at reboot immediately press F12 do not wait for Windows icon to appear, this image has been processed can be used directly)

It's easy to have a five-country problem. A concrete solution to the prospect of a five-country post look Up (http://bbs.pcbeta.com/viewthread-863656-1-1.html)

Install OSX10.11.5 (this is the same as the rest of the OSX system installation methods, so borrowed from my previous tutorial in the picture)

1. Select a language

　　　　

2. In the upper left corner of the screen, find "Utilities"-"Disk Utility"

　　　　

3. Select the hard disk to install click Partition

　　　　

4. Select the partition you want to install

　　　　

Six, perfect black apples

After the last operation, OSX system should have been installed, the rest is to improve the black Apple to make it more convenient to use

1. Install Clover Boot (MAC environment) for the hard drive installing the OSX10.11.5 system

Download the installation package for Clover (http://pan.baidu.com/s/1qXPtlO4) in the OSX environment

Open a. pkg package

　　　

Install clover to the hard drive where OSX10.11.5 is installed (remember to click Customize at the time of installation and then display the "Drivers64uefi" and "Install clover to EFI System area" on the following screen)

Install the boot every time you boot directly from the BIOS choose to boot from the hard disk, or each time you have to plug the USB stick to boot.

　　　

After successful installation, open clover Configurator.app Click Mount EFI that button so that the hard drive's EFI partition is mounted on the desktop, emptying all the files in the EFI partition, and then putting the EFI partition file that is appropriate for your computer in it. What do you need for your PC? EFI files go to the Vision Forum (http://bbs.pcbeta.com/viewthread-1606219-1-1.html)

　　　

　　　

2. Install the driver

Because each computer installed black Apple driver is not the same way, so not in detail here, there is a need to go to the Vision Forum itself Baidu. If the same as My Computer model (ThinkPad E431 62276HC) configuration, you can use my EFI partition (HTTP://PAN.BAIDU.COM/S/1PLUVI5D) directly

Vii. problems encountered during installation

1. Direct error using Clover boot: Zone_init:kmem_suballoc failed "0/library/caches/com.apple ..."

Problem Reason: memory location is incorrect

Workaround: Swap the memory bar for a bit.

2. Use clover to boot into the +++++++++ (a stack of plus signs in the upper left corner of the screen)

Workaround: Check that the drive in the 64uefi folder of the EFI partition is complete. The correct partition: Eight, PostScript　　life is a toss. Especially the black apples .... All kinds of problems will appear if you have trouble, you can try to install a virtual machine. The virtual machine seems pretty good to wear. If you have money, go straight to buy a mac= = hope that everyone can put on their own black apples.

Windows environment using Clover Four blade grass guided dual HDD installation OSX 10.11.5 original image