Windows 7 suddenly loses power by default into repair mode workaround

Windows 7 suddenly loses power by default into repair mode workaround

"keywords": Repair mode

"Applicable version": Windows

"Problem description":

The Windows virtual machine does not shut down properly, and then the system starts to enter recovery mode by default and cannot be recovered.

"Problem analysis":

Virtual machines running on the virtualization platform, after a sudden power outage (host crash, etc.), virtual machine on the virtualization platform under the HA role, the virtual machine will drift to another normal host to continue to run, but because Windows is running on the hardware by default, Therefore, in order to protect the system by default into the recovery mode.

"Workaround":

Enter the Windows system and use the administrator to open cmd and run the following two commands:

1. Bcdedit/set {default} bootstatuspolicy Ignoreallfailures

2. Bcdedit/set {current} recoveryenabled No

"Summary":

1, when we make the virtual machine template, we set the default normal entry system (especially desktop virtualization)

This article from "Think you think, no no no" blog, please be sure to keep this source http://joket.blog.51cto.com/3504252/1857873

Windows 7 suddenly loses power by default into repair mode workaround