First, the preparatory work:
1. Prepare the Microsoft Windows 98 installation CD.
2. If possible, scan all hard drives with ScanDisk before running Setup to check for hard drive errors and fix them, otherwise setup will be troublesome if you check for hard drive errors when you run the program.
3. If the installation process needs to use the Product key (the installation of serial number), the paper records the installation files of the product key (installation serial number).
4. Where possible, use the driver Backup utility (such as Driver Wizard V1.9 Beta.exe) to back up all drivers under Windows 98 to your hard disk (for example, F:\Drive). It is best to download the driver of local network card driver and modem, and so on, if you use broadband connection, please download and save the broadband dial-up software Enternet300, you can find most of the software you want on the Internet.
5. If you want to format the C disk during the installation process (the recommended format for the installation of C disk), please back up the C disk useful data.
6. You must have an active partition in the FAT or FAT32 file system format, Windows 98 can only be installed in the FAT or FAT32 file system format partition, the recommended partition space is greater than 2G
second, the use of CD-ROM to start the system:
(If you already know the method please go to the next step), put the 98 CD-ROM into the optical drive, reboot the system and set the optical drive as the first boot disk, save the settings and reboot, if you can see the installation interface without incident, if you do not know the specific procedure please refer to the same--> how to enter the Pure DOS system:
Third, install Windows
After the CD has been started, if there is no accident can see the boot interface, will appear as shown in Figure 1 below, such as the CD can not be started, available 98 boot Floppy boot (set floppy drive as the first boot disk).
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
If you want to format C disk, that is, the second entry into the DOS, the prompt "A:\>_" under "Format c:" After the return, and then enter "Y" after the return to open such as the format of C disk!
Here I have formatted the C disk, so choose the first item (install 98 from the CD) and return directly to the carriage, which will soon appear as shown in Figure 2 (if you do not choose to start the first item automatically after 30 seconds).
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
A start can use the mouse, Chinese interface, click the "Continue" button, appear as follows Figure 3
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Preparing for the Windows 98 Setup Wizard, end soon, as shown in Figure 4 below
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
The license agreement is of course to accept! Otherwise it cannot be installed. Use the mouse to move the cursor to the "accept agreement" in front of the circle click to make a black dot in the circle, and then click "Next" appears as follows Figure 5
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Here, select the directory used to install the system files, the default is installed in C:\WINDOWS, click "Next" appears as follows Figure 6
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
The installer starts checking all the hard drives and appears as shown in Figure 7 below.
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Start by checking the installed components on the disk and the directories that are ready to install the system, which appears as shown in Figure 8 below shortly after completion.
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Check the available disk space and check for disk errors. When finished, it appears as shown in Figure 9 below.
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Figure 9
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
This image will appear if you do not format the C disk
Figure 9 requires you to select the location, the default selection of China, point "next" appears as follows Figure 10
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Whether you want to make a Windows 98 Startup disk or not, it's important to "next", which appears as follows Figure 11
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
If you do not want to make a Windows 98 Startup disk, click "Cancel" to skip this step. It is recommended that you make a startup disk, please put the blank floppy disk in the floppy drive, and click "OK" to start making the startup disk. Show Figure 12 below
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
The 98 boot disk is being produced, after the completion of the following Figure 13, (because the floppy disk is more vulnerable to damage, it is recommended to make more than one boot disk standby)
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Remove the 98 boot floppy disk that you just made, and then click OK, which shows the following figure 14
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Click "Next" here, there is no previous step, the program is not reversible, there is no room to turn back, point "next" is not a big deal, appear as follows Figure 15
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Start copying the required files for startup, and system files, this process takes a long time, you can go to rest, after the copy is completed below Figure 16
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
If you have not removed the floppy disk, please remove the floppy disk and click "OK", which appears as follows Figure 19
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
The system will reboot for the first time when the Windows 98 splash screen appears, start installation hardware, Start menu, System setup, etc. It will be restarted several times, you can take a break, the installer will automatically complete the rest of the process. It is done as shown in Figure 20 below.
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Iv. end of work
1. Install the driver, please refer to---> Driver installation
2. Set up Internet connection, Internet Upgrade system, System setup
3. Install anti-virus software, upgrade anti-virus software, loading procedures, etc.
To sum up, the end work takes much longer than it takes to install. Recommend that most users, after installing systems and programs to optimize the system, and then use the system backup tools (such as Ghost Chinese Companion 1.0 official version, etc.) to back up the entire C disk to a mirrored file (mirrored file size of about the entire C disk size of about 1/3 to 1/4), Later, if the system is corrupted, it can take less than 10 minutes to recover a new system that is identical to the backup.
