Windows Mobile simulator network connection settings

To ensure that the host is connected to the Internet, follow these steps:

1 Open ActiveSync , Click " File "-->" Connection settings ", In " Allow connection to one of the following ports " Select "DMA" .

2 Open Vs2005 , Click the menu " Tools "-->" Device Simulation Manager " , Select Windows Mobile 5.0 pocketpc Simulator. Right-click " Connection " . After the simulator is started, click " Insert Base " In this case ActiveSync To connect to the simulator and synchronize data.

3 in the simulator, click " Start " --> " Settings " , click " connection " tab.

( 1 ) Select ' Nic " :

"Connect to my Nic"Select"Default unit settings".

In " Click the adapter to modify the settings: " Select "Asyncmac ndiswan miniport ", Selected " Use IP Address " , Click "OK" , Prompt " The new settings will be applied the next time the adapter is used. If the adapter is currently inserted into the device, remove it first, and then re-insert the adapter to apply the settings. " , Click "OK" , "OK" .

(2) In"Connection"Select"Connection":

In " Advanced " Tab, click " Select Network " , In " InProgramAutomatic Connection Internet Use: " Select " Unit settings " The default value is "Internet Set " And click "OK" , "OK" , "X" .

4 At this time, you can access the Internet. Click " Start "-->" Internet Explorer "-->" Favorites "-->" MSN mobile ", The page appears. If you cannot open the webpage, you can " Device simulator Manager " Select the simulator, right-click " Remove Base " And then click " Insert Base " , Reconnect ActiveSync Connect once, no problem