Windows Remote Control mac

One, Mac computer settings 1, screen sharing settings

Open the settings for Mac computer, find the Sharing option, enter the interface as follows:

You can see the default share of the Mac computer is very much, of course, we only use the screen to share this, you will find that screen sharing with the VNC protocol, this is just a connection protocol, so remember, just like SSH. Next click on PC settings, a settings window will pop up,

Two options are checked, then set a connection password. Remember the password and use it when you connect. The settings on your Mac computer are almost done. Next is the router setup, why set up the router? Because I said, Mac is online through a router, to allow the extranet to access my computer must be set up on the router a forwarding rule.

2. Routing and Forwarding settings

Enter the router, this I do not want to speak more, or the last picture.

To the left, go to forwarding rules,

Of course, different routes, the interface may not be the same, find the relevant words on it.
The next step is to set the forwarding rules, or first.

It's more important here, remember.
1. First of all you need to know the Mac computer IP address, this is relatively simple, with command ifconfig or graphical interface can be viewed, it is best to set a fixed IP like me.

2. Set it up in the line I circled. Here's a question, why is the service port number 5900? Don't ask why, remember that VNC's default service port is 5900, just as you should remember to have www when you enter a URL. The other is not set up, set a forwarding rule can be. Click Save when you are finished setting up. Sometimes it is necessary to restart the route, but generally not.

3. Get the public IP. The above forwarding rules set up, external network if access to Mac computer can not even 192.168.1.188 it, so to know the router dial the public IP, in the running state of the router WAN port State IP address is. the Mac computer is ready. Can go outside and tinker with Windows 7.

Ii. Windows (company) PC settings 1, tools

Remote connection requires two hosts to reach some kind of protocol, and here we use a VNC software, why use it? There is no reason why, because the Mac computer natively support VNC communication protocol, it is only wronged windows, installed on the VNC Viewer client, you can connect to the Mac.
VNC Viewer for Windows,:vnc, note the downloaded version, with 32, 64-bit points.

2. VNC settings

1. First, double-click Start Software, enter the public IP, direct Internet point connect. Interface: (if the Internet through the agent, see the next step.) ）
   
2. Open the software options, set up the proxy server and set the interface as follows:
   
3. Click Connect and enter the connection password. (What password?) Before the password set on the Mac, remember not), to this step shows that your network connection is all right, if the error, self-reflection go! (So the detailed tutorial is not set)
   
4. Finally, no final, click OK, the connection is successful! Open the browser on your Mac and open your thunder download now!
   

Iii. Summary 1, common protocol port

Http-->80 ssh-->22 vnc-->5900 also have SMTP, POP3, FTP and so on the default port of common service can remember, really can't remember to ask Google and degrees Niang also can, in fact, often not much, At least the number of writings in classical Chinese is much less than when we were young.

2, Proxy Server online

This kind of Internet way is very egg ache, but also wood has method ah. Remember to set up an agent on your Internet-connected software!!!

3. Routing and Forwarding settings

What port you need to use to set which port, generally for remote connection to SSH 22 port or VNC 5900 port. Sometimes you can customize the port by writing a web app or something yourself.

Transferred from: http://www.ituring.com.cn/article/111047

Windows remote Control mac