Windows Server 2008 R2 Active Directory installation (multi-Server)

Four Windows Server 2008 R2 systems need to be installed, and the four hosts have the following roles: Active Directory, database Server, certificate Server, and VC Server (SSO, web, vsphere vcenter inventory service ). The following describes how to install seven systems and plan the domain name: your domain name address segment: 10.121.80.x/24

Serial Number	Domain name	Address	System	Disk	Name	Role
1	Your domain name	10.121.80.105	Windows Server 2008 R2	100 GB	HZ-DC. Your domain name	Active Directory
2	10.121.80.106	Windows Server 2008 R2	100 GB	HZ-DB. Your domain name	Database Server
3	10.121.80.107	Windows Server 2008 R2	100 GB	HZ-VC. Your domain name	VC system server
4	10.121.80.101	Vsphere 5.5	40 GB	HZ-ESX-01. Your domain name	Virtualization 01
5	10.121.80.102	Vsphere 5.5	40 GB	HZ-ESX-02. Your domain name	Virtualization 02
6	10.121.80.103	FreeNas	3*146 (sas) gb	HZ-NAS. Your domain name	NAS shared storage
7	10.121.80.104	Windows Server 2008 R2	100 GB	HZ-CA. Your domain name	Certificate server

Before installing the Active Directory, you must plan the IP addresses and host names.

Select Add role Service

Select Active Directory domain service

Install. net Framework3.5.1 and proceed

After the corresponding role is installed, restart the server.

Wait until the restart is complete and start to install the Active Directory, as shown in the figure below:

Because it is the first time to create a domain environment, select create a domain in the New Forest. If the original company already uses a domain, you can skip the domain installation process.

The FQDN of the forest root-level domain, your domain name

Install the forest function level. Select Windows Server 2008 R2

Specify the storage location of the database, log file, and Sysvol. We recommend that you store it on another disk.

Set the restore password of the directory service and perform relevant recovery operations when a fault occurs. Not the administrator password

Installation Summary,

After confirmation, perform the relevant installation process. After the installation is complete, restart the server to complete the installation.

Restart the server to log on,

View the installed Active Directory.

Now the installation process of the Active Directory is complete, and the enterprise can also install it according to the above process. The prerequisite is that relevant planning must be performed first, and planning is also a learning.