Windows server 2016 cannot be connected to the Internet. server2016

Windows server 2016 cannot be connected to the Internet. server2016

 

 

First, the network is divided into two problems: 1. WLAN (Wireless Network), 2. Ethernet (wired network)

I. Solutions to WLAN Problems

1. Open the Server Manager

2. Add roles and functions

3. Click next to "function", select DirectPlay and wireless LAN services, and continue until the installation is complete, and then restart the computer. Of course, I think it will be more scientific to add this webpage to favorites before restarting.

 

 

 

4. Is it still not connected to the internet? If it is not connected to the Internet, it is right. The driver has not been installed yet. Go to the next driver software on the Internet, and drive your life. (I am not an advertisement. I have received an advertisement fee and strongly protest ). OK. At this point, you should be able to connect to WiFi.

 

Ii. Ethernet solution

Whether the driver software is not installed with wired network or the exclamation point of the Ethernet controller is desperate ).

 

1. Download a PROWinx64 driver from the Intel official website and decompress it to any folder. Go to the PRO1000-> Winx64-> NDIS64 folder, and find the file named e1d64x64 (note that the installation type is correct ).

 

2, open with notepad, find the ID of the I219-V should be E1570.6.3.1

 

3. Find the key of [Intel. NTamd64.6.3.1] on it. Under this key, copy the three rows corresponding to ID (E1570.6.3.1.

 

 

4. After burning, there is a key named Intel. NTamd64.6.3.1 under the Intel. NTamd64.6.3 key. Paste the copied three rows of data at the bottom of the key. OK, save.

 

 

5. Open the command window and execute the following two commands in sequence.

Bcdedit-set loadoptions DISABLE_INTEGRITY_CHECKS

Bcdedit-set TESTSIGNING ON

These two-line commands mean to enable the test mode so that the unsigned driver can be installed in the test mode (because we have modified the driver configuration file)

Restart your computer.

6. In the Device Manager, find the terrible Ethernet controller that is overwhelmed by exclamation points. Right-click to perform the following operations.

Update the driver software -- browse the computer to find the driver software -- Click Browse to find the last-level directory (NDIS64) of the file you just modified, and then confirm the installation. If the Windows security prompt appears, click "install this driver. OK. Now the desperate exclamation point should have been gone, but there is still one thing to be done. Disable test mode. Open the command window. Execute the following two commands in sequence:

Bcdedit-set loadoptions ENABLE_INTEGRITY_CHECKS

Bcdedit-set TESTSIGNING OFF

The I211 driver installation method is the same as the I219-V, but the corresponding file is not in the NDIS64 folder, but in the e1r63x64 file in the NDIS63 folder. And I217-V and I218-V are within a file, here I will not elaborate on it

OK. Restart your computer.

Welcome to reprint, but please indicate the source of http://www.cnblogs.com/Goshinki/p/7514398.html