Windows Server CD-ROM boot installation process detailed Illustration _ Installation tutorial

First, the preparatory work:

1. Prepare the Windows Server Simplified Chinese version of the installation CD and check that the optical drive supports booting.
2. If possible, scan all hard drives with ScanDisk before running Setup to check for hard drive errors and fix them, otherwise setup will be troublesome if you check for hard drive errors when you run the program.
3. Use paper to record the product key of the installation file (installation serial number).
4. When possible, use the driver Backup tool (such as Driver Wizard V1.9 Beta.exe) to back up all the drivers in the original Windows 2000 to your hard disk (for example, F:\Drive). It is best to note the motherboard, network card, graphics and other major hardware models and manufacturers, download the driver in advance standby.
5. If you want to format C or D in the installation process (the recommended format for the installation of C disk), please back up the C disk or D disk useful data.

second, the use of CD-ROM to start the system:
(If you already know the method please go to the next step), put the 2000 CD-ROM into the optical drive, reboot the system and set the optical drive as the first boot disk, save the settings and reboot, if you can see the installation interface without incident, if you do not know the specific procedure please refer to the same--> how to enter the Pure DOS system:


Third, install Windows Server
After the CD has been started, if you can see the installation interface without any surprises, it will appear as shown in Figure 1 below
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
This step has three options "1." To start installing Windows 2000, press ENTER, 2. To repair the installation of the Chinese version of Windows 2000, press R 3. To stop installing Windows 2000 and exit Setup, press F3 "Here we choose the first item by pressing" ENTER " The key carriage return appears as shown in Figure 2 below
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
License Agreement, there is no room for choice, press "F8" after the following figure 3
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Here use the "down or up" arrow keys to select the partition used to install the system, select the partition and press "enter" key to return, the installer will check the selected partition, if the partition has been installed another system will appear in Figure 4 below
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
To use the selected partition installation, press the "C" key, which appears as shown in Figure 5 below
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
To use the selected partition installation, press the "C" key, which appears as shown in Figure 5 below
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
This allows you to format the selected partitions to transform the file system grid, or to save the existing file system, with a variety of options, but note that the NTFS format saves disk space, improves security, and reduces disk fragmentation while there are many problems NTFS-formatted partitions are not visible under OS and 98/me, where you can select "format a disk partition with the FAT file system" and press "enter" to return, as shown in Figure 6 below
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
To format the warning for the selected partition C disk, press the F key to prepare the format C disk, as shown in Figure 7 below
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Because the selected partition C space is greater than 2048M (that is, 2G), the FAT file system does not support disk partitions larger than 2048M, so the installer formats the C disk in the FAT32 file system format and presses the "Enter" key to return, which appears as shown in Figure 8 below
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
The C partition is being formatted in Figure 8, and the format partitioning option can only be provided during installation by starting the Windows2000 Setup with a CD-ROM or by installing the boot floppy disk; If you start into DOS with an MS-DOS boot disk, run the I386\winnt When you install Windows2000, there is no format partitioning option when you install Windows2000. After the format C partition completes, Setup starts copying the files from the CD, as shown in Figure 9 below
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
In Figure 9, the file is copied, and after the file has been copied, after the file is copied, the system will automatically reboot after 15 seconds, please note that when the system is restarted, set the hard drive as the first boot disk or temporarily remove the installation disc before putting it in, so that the system does not go into the dead loop and restart the installer. After the reboot, the first 2000 splash screen appears as shown in Figure 10
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
The following Figure 11 appears
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Start testing equipment and installation equipment, during which will be black screen two times, this is normal, after the completion of the following figure 12 shows
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Regional and language settings can be selected by default, directly click Next button, appear as follows Figure 13
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Here any input you want good name and unit, click "Next" button, appear as follows Figure 14
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
If you do not write down the product key (install serial number) in advance! Here Enter the installation serial number such as: H6TWQ-TQQM8-HXJYG-D69F7-R84VM, point "Next" button, appear as follows Figure 15
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Here you can choose any item you want, configure it as a server to select the first item, configure the workstation to select the second item (same as Windows 20,031), and then press "next" to appear as shown in Figure 16 below
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Computer name any input default as the server name, enter two times the system administrator password, please remember this password, log in with, point "next" appears as follows figure 17
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Component options appear, depending on the needs of the selection, can also be installed after the completion of the Add/delete changes, point "Next" continued, the following figure 18 shows
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Date and time settings do not need to speak, click "Next", and then start to install the network, appear as follows Figure 19
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Select "Typical" Network settings, click "Next", appear as follows Figure 20
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Click Next to start installing components, saving settings, and deleting used temporary files. When finished, figure 21 appears as follows
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Click the "Finish" button to complete the installation process. The system reboots, after the splash screen, the picture shown in Figure 22 below
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Press the Ctrl+alt+delete key to start the system, which appears as follows Figure 23
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Enter the password you set up when you installed it, which appears as follows Figure 24
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
If you do not want to configure your server, you can later configure, directly point "next", the desktop will appear as follows Figure 25
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
The check in front of "show this screen at startup" is canceled, the window will not appear the next time you start, close the window directly. The desktop will appear as shown in Figure 26
screen.width*0.7) {this.resized=true; this.width=screen.width*0.7 this.alt= ' Click here to open new Window\nctrl+mouse Wheel to zoom in/out ';} ' Border=0>
Windows Sever 2000 started successfully

Four, the basic setup
After the installation is complete, the post work takes much longer than the installation.
1. After the installation is complete, then check to see if the device driver is all installed--> Reference driver installation
2. Set up Internet connection, Internet Update system. --> reference to establish a broadband connection
3. Installation software--> reference software application
4. Optimization and backup system--> Reference system optimization