Windows SP2 Free installation version-Deepinxp PLUS V2 Beta Download _ Common Tools

Design principles:
1. Easy installation: No activation, no unattended, no manual loading Sata/raid drive, automatic installation of a variety of hardware drivers, free to choose landscaping themes and common software.
2. Fast, Save resources: Optimize system parameters in advance, direct integration of patches, no need to install and then upgrade one after another and leave a lot of junk files.
3. Stable security: Integrates all the latest key patches, minimizing the possibility of being attacked and not bundling any rogue software.

★ Friendly Reminder ★
If you do not use the automatic installation method described below, but you run Winnt.exe or Winnt32.exe for manual installation, you can use this serial number: Mrx3f-47b9t-2487j-kwkmf-rpwby
CD KEY:HCQ9D-TVCWX-X9QRG-J4B2Y-GR2TT for testing

★ CD-ROM start new Installation ★
1. Please use the Burn software alcohol 120% or nero, select the Mirror Burn Wizard-> Select this ISO file-> choose Lower burn rate-> start burning.
2. After burning the finished disc can be placed in the machine optical drive, from the BIOS set from the CD drive, you can start the installation process. (Note that your system disk data is recommended for backup before installation)
3. Do not use Winiso, WinRAR and other tools to untie compression or directly to the ISO as a file to burn to the disc, which is certainly a failure.

★ Boot from DOS hard drive installation ★
1. Load the ISO file with alcohol 120% or daemon tools (new WinRAR can also be opened).
2. Open the disk corresponding to the virtual CD drive in My computer.
3. Copy all the files in the corresponding directory on the CD to the hard drive to create a new directory ahead of time. Standard newer version of all the installation files in the WINXP\XP01 directory, drive the enhanced version of all the installation files in the WINXP\XP05 directory
4. Boot to the DOS command prompt with the Win98 boot floppy disk or bootable CD (please make sure your C disk is FAT or FAT32 format, otherwise it will not install properly). If you plan to install in C, it is recommended that you format the C disk with the format c:/q/s command, because you cannot format the C disk after the copy file is completed.
5. Before entering the copy directory on the hard drive, perform the unattended installation of the Winnt.bat (not the Winnt.exe under the I386 directory).

★ New Direct installation from Windows interface ★
Method One:
1. Load the ISO file with alcohol 120% or daemon tools.
2. Open the disk corresponding to the virtual CD drive in My computer.
3. Install according to the automatic running prompt interface (or the Setup.exe program under your own CD).

Method Two:
1. Use Winiso, or utraliso, or winrar to open the ISO file, copy all the files in the root directory of the CD to the hard drive to create a new directory ahead of time.
2. Run the Winnt32.bat (not winnt.bat) under the directory, and follow the prompts to start the installation. This version cannot be used for upgrade installations, but only for new installations.

Windows Start installation differs from DOS installation:
1. More convenient, no need to enter the DOS environment. No discs are required after reboot, but there is at least 2G space for the partition to be installed beforehand.
2. If you want to install in C disk, because C disk can not be formatted under Windows, and installation process because C disk already has the boot information, also can not be formatted, so you will not be able to obtain a clean system in C disk. The DOS installation can be formatted by performing the format C:/q/s command before installation. Of course, you do not have this problem if you install it in other partitions.
3. If you want to change the installation of the target partition, when the installation process prompts you to convert FAT partition to NTFS partition, you can press the "ESC" key to cancel, will exit to the partition selection interface, this time you can choose to install Windows XP to other partitions.

★ No optical drive or boot disk DOS installation ★
If you do not have a boot floppy or floppy drive, or if you do not boot a DOS disc or optical drive, use a friend of Windows 98, press F8 at startup and select DOS mode. With Windows XP or Windows 2000 friends, you will need to install the Xusboot hard disk version under Windows, reboot the boot menu and choose to enter the DOS environment before you start the installation (and copy the directory you need to install to the hard drive).

Download files
Http://www.7ke.net/attachment/1176545821_0.rar