Windows under Charles Use tutorial Guide

1, download will not have to say, many online cracked installation package

2. The following is the PC-side grab Packet usage Charles supports the request to catch the HTTP, HTTPS protocol, and does not support sockets. Then Charles will automatically configure the proxy settings for IE and the tools, so that the open tool is already in the bag state. Here to open the Baidu grab package, the tool interface and related basic functions as shown:

The 7 locations in the list are some of the most commonly used features.

(1) The Trash icon, the function is clear, clear out all the request display information.

(2) The telescope icon, the function is to search for keywords, you can also use CTRL+F implementation, you can set the scope of the search.

(3) The icon of the red dots in the middle of the circle, the function is the data display or the settings that are not displayed. This I think is the Charles tool is very convenient for a two point, generally so that it does not show the grasping state, only when the test itself before and after, in order to capture and display the state. This allows you to quickly and ruthlessly get the information you want, without having to look for it in a bunch of data requests.

(4) Edit the modification function, you can edit and modify any request information, after the modification is finished click Execute to send a modified request packet.

(5) The URL information for the requested address of the fetched packet is displayed.

(6) The information of the requested content of the fetched packet is displayed.

(7) Returns the display of data content information.

There are various forms of data display in 5, 6, 7, where Raw is the state of the original packet.

Display mode

Charles grabbed the package display, supported by two modes, structure and sequence, with the following advantages, respectively.

Structure form such as advantages: can clearly see the data structure of the request, but also the Domain name Division request information, can be very clear to analyze and process the data.

Sequence form, such as advantages: can be very clear to see all the requests, without a layer of the point to open, here is the order of data requests to execute, that is, the request is quickly displayed in front.

That's a better way to compare yourself.

mobile app Grab bag

This is a lot simpler than the other grab packages, and the steps are as follows:

1 make the phone and computer in a LAN, not necessarily an IP segment, as long as the same oil spill under the same, such as the computer connected to the wired network IP 192.168.16.12, then the mobile link WiFi IP is 192.168.1.103, but this wired and wireless network ultimately comes from an external IP, which is also possible.

2 The following is the specific configuration, here the computer side is not to do any configuration, but need to turn off the firewall (this is important)!

Then Charles sets the range of IP addresses that need to be set under Allow to receive. Set first to enter this position proxy-access Control Settings Then if the IP range received is 192.168.1.xxx, then add and set to 192.168.1.0/24 if all the range is received, Then set it directly into 0.0.0.0/0.

Then if you check the Proxy-windows Proxy, then will be on the computer grabbed the packet request also grabbed, if only grab the phone, you can set this to not tick.

3 Next below is the phone-side configuration

First use the Cmd-ipconfig command to view the IP address of your computer this is not the picture, IPv4 is your current IP address

Then on the phone side of the WiFi proxy settings there to make the relevant configuration settings.

Here the proxy address is filled in as the IP address of the computer, and then the port is written 8888 (this is the default setting of Charles), if you modify it to write their own modified port.

On the top is the iOS proxy settings

4 OK, so the configuration is done! You can grab the bag by opening the app you need to grab it

Windows under Charles Use tutorial Guide