Winpeter make u disk boot disk

　First, the design of WinPE start USB drive production

1, first plug into the computer USB interface (Important note: The production process will be formatted USB disk, pay attention to backup data);

2, unzip the downloaded Winpeu.rar file;

3, in the Winpeu.rar decompression directory open UltraISO.exe program;

4, in open UltraISO program interface, double hit open winpe.iso disc image file;

5. Then select "Boot disc"/"Write HDD image" in the top menu;

6. In the "Hard Drive" project, select the USB flash drive you want to make the boot disk (software default USB drive);

7. Select "Usb-hdd+" or "Usb-zip" in the "Write as" item (try to select, whichever is valid);

8, finally, click "Write", wait a few seconds, prompt "Burning successfully", click "Back" exit.

Figure 1-First step: Unzip the downloaded Winpeu.rar file

Figure 2-Step two: Click to open the UltraISO.exe program

Figure 3-Step three: then double-click on the Winpe.iso disc image file (the CD-ROM directory is the "bootable disc" flag)

Figure 4-Fourth step: Select "Boot disc"/"Write to Hard disk image" in the upper menu

Figure Fifth: Select "usb-hdd+" or "usb-zip+" in the "Write by" item

Finally, click "Write", wait a few seconds, prompt "burning success", it indicates that the finished production

Hint: "Write method" can try to choose, as long as the finished production can successfully start the computer can

"Hard drive" option, the system will default your USB flash drive, will not operate on the computer's hard disk, so can rest assured

(This interface is 8G of the Taiwan Electric disk drive production situation, after the completion of the production has been in several stations to try to start and success)

Figure 6- The sixth step: after the "Burn Success", click the "Back" button to exit the production

(This is another use of the 1G Kingston U disk production situation, the USB flash drive production can also successfully start the computer)

Buckwheat tips:

1) The download package is buckwheat use the downloaded "Generic PE toolbox" to generate the Winpe.iso image file and then compress it into Winpeu.rar with the UltraISO program. Using the UltraISO.exe program, a few seconds to make a good disk WinPE startup disk, making very simple and convenient.
2) can use UltraISO.exe to view the contents of Winpe.iso, modify, replace the relevant files, adding and removing tools software, to create their own personalized WinPE boot U disk. Of course, we can also personalize it in the Petools directory after installation. Petools directory is the external Tools software directory, Setting.ini is a configuration file. For the previous version of 1.9, the external program is visible, you can directly control the configuration format and add and remove the tool software, configure the corresponding display menu; For the 1.91 version, the external program is packaged in the Petools.wim file, the program is not visible, we can first in the Petools directory under the extra directory, adding a custom Program folder, and then in the startup WinPE through "Load a custom program", customize the shortcut for the added tool software.
3) When you start your computer using a USB flash drive, select the first boot device in the BIOS as USB, and select "Usb-hdd" or "Usb-zip". Because the motherboard is different, the choice of USB method differs, please try to select the specific. Buckwheat is made using "usb-zip+" format, select "Usb-zip" to boot, and successfully boot and run on multiple computers.

　　Second, set the USB flash drive as the first boot device method

To start the computer from a USB stick, set the USB flash drive in the BIOS to the first boot device.
First plug into the USB port (preferably in the back of the host USB interface, and the other USB device temporarily unplugged), restart the computer, when the system has just entered the self-test interface, press the "Del" key to enter the BIOS settings, find out about setting up the computer boot, such as "Advanced BIOS Features "or" Boot device priority ", corresponding to the format of your own startup USB drive, select" First Boot device "as" USB "or" USB-HDD "or" Usb-zip ", then press the F10 key to save, and then press the Y key to confirm , enter exit BIOS setup and the computer restarts again.
Depending on the motherboard, the USB boot selection method differs. Some of the newer motherboards, "USB-HDD" are selected in "Advanced BIOS Features"/"Boot Seq & Floppy Setup", set the "First Boot device" entry to "hard Disk" and then " Hard disk Bot Priority "Select your USB drive (U disk to plug in before booting).
I p4s8x-mx ASUS Motherboard computer using a USB flash drive when booting, even if the first boot device selected mobile device (the motherboard does not have the option of USB, but removable Dev., which is the mobile device), the computer will not automatically start from the USB stick. But you can press the F8 key at the beginning of the machine, the Boot Device selection interface appears, choose from your own USB stick to successfully start. In addition, try to find: in "hard Disk Drives"/"1st Drive" in the selection of their own USB stick, you can see in "First Boot device" and select your own USB flash drive, to achieve a successful boot from the USB stick.
It is said that some motherboards can press the ESC key to bring up the boot Device selection menu at boot time. If you encounter a computer that can not be launched directly from the USB stick, you can try to press some function keys, such as ESC, F8 key and so on, to see if you can bring up the boot Device selection menu, and then choose your own USB stick to start.

different motherboard BIOS Select how to start the USB flash drive, see : http://blog.sina.com.cn/s/blog_58c380370100mnh1.html

　　Iii. Loading the custom program (add your own tool software)

We can add a custom program folder to the extra directory below the Petools directory, and then, in the startup WinPE, through the desktop's " Load Customization program ", customize the shortcut for the added tool software to the desktop of the computer. Special note: The added program should be placed in a separate folder, the file name is consistent with the folder name. For example, add software Abc.exe, in the Petools directory below the extra directory, add the ABC directory, and then the file Abc.exe copy into the ABC directory.

　　Iv. using WinPE to start the USB drive installation system

The main function of WinPE to start a USB flash drive is to start the computer. As for the use of WinPE boot USB drive to install the system, the same as your usual method, but the system installation files on the USB stick. Of course, if you have a system installation file on your hard drive or a copy from a USB drive to your hard disk, install the system from your hard drive.

When WinPE starts to make a USB flash drive, you can start your PC and then put the original system installation files, or download the system installation CD image file from the Internet (. ISO), or. ISO. GHO HDD installation image file, copy to the USB flash drive, then you can install the system directly, or use the WinPE boot USB drive tool included in the virtual optical drive software, one-click Recovery and backup software to install the system.

Winpeter make u disk boot disk