WinServer2012 Nic Aggregation

The server multi-Nic aggregation can increase the stability and increase the network bandwidth, avoid the single NIC failure and cause the server network not to pass. It is important to note that both servers and switches connected at both ends of the converged link must use the same aggregation pattern, such as using LACP.
Go to Server Manager = "Local server, click NIC Teaming."

Go to NIC teaming, select Tasks, and create a new group.

Fill in the group name, tick the network card that needs to be aggregated, group mode can choose LACP (when the server side uses LACP mode, the peer switch also uses LACP mode, otherwise the network will be abnormal), load Balancing mode chooses the address hash.

After aggregation, for example, if the LACP negotiation error is prompted, it is possible that the aggregation pattern at both ends is inconsistent or the aggregation is incorrect.

After aggregation, NIC teaming is turned off from disabled to Enabled.

After the aggregation succeeds, the network connection has one more NIC, this is the aggregation network card, after the general method configures the IP address of the network card to be able to use normally.

WinServer2012 Nic Aggregation